(per 10Sheets) Rockwool Slab is a highly effective natural insulating material
minimum Quantity required 300 sheets

Size 600mm*1250mm Density (32-35)kg/cm3
price per board

(32-35KG/M3 Density)

High Performance Rubberized Bitumen Emulsion Coating

The RAK Green Building Regulation ( Barjeel )
Supply and apply the approved quality waterproofing system for the roofs (Combo Roofing System).

1- Polyurethane foam, 60mm thick, and density of 40-45 kg/m³. ( UV 0.3 W/m²K ).
2- Acrylic - Liquid UV protection coat (600mic.Thick).
3- Geotextile /Separation Layer 100 g/m²
4- expansion separator material Fiberboard -at least 10 mm thick & no more than 16 square meters
5- Concrete screed (20N/M³ - 300 OPC, 80mm AVE. Thick.) without (Ice&Fibre)
6- Angle fillet (cement sand mortar ).
7- Remove the filler board/flexible sheet -stage (4).
8- Expansion joint filter (Backing rod and Pu sealant).
9- Acrylic Topcoat final

ROOF WATERPROOFING / SAB® MINERAL (MEMBRANE) SYSTEM:
1-One coat of bituminous primed surface.
2-One layer of APP Mineral Membrane 4mm thick 180 g/m2

Supply and apply the approved quality liquid waterproofing Cementitious system for all wet areas:-
1- Supply And Apply 2 coats of Cementitious Waterproofing.

SAB® Crystal 410 concentrate and one more other supporting material.
• As preparation:
• Cleaning scope of work area properly.
• Spraying the outer side with water, the Property of this material it needs wet area to make the required strong interaction.
• Puncture the surface by making tiny holes, this will ensure perfect absorption.
• Cleaning these small holes and insures it dry; taking into consideration the whole area is still wet.

1- Polyurethane foam spray 30-35mm
2- Acrylic top coat spray (LAITE GREEN)

Elastomeric Acrylic Waterproof & Protective Coating

per square meter
1mm-1.5mm Hand Applied, Rapid Curing Polyurea Waterproofing Membrane.

Supply and apply the approved quality system for pile head treatment and insulation 500 mm DIAMETER:-
1- Repair surface with cementitious grout
2- Treatment by using (Fosroc) super cast DC and super cast EP10

Two Component Polymer Modified Flexible Cementitious Waterproof Coating

is a state-of-the-art crystalline waterproofing admixture for concrete, available in powder form.