Delivery with in 2 days
Pidilite DR.Fixit UniThane HB 20kg
204.75 AED 204.75 AED 204.75 AED
Single Component Water Based Hybrid Polyurethane Coating
Delivery with in 2 days
Dolphin, 120 RTV High-Temp Silicone Sealant, 280ml
189.00 AED 189.00 AED 189.0 AED
special sealant for usages subject to high temperatures. up to 300°C
1 Carton (24piece)
SAB Substructure Two Layers
Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer
2 - Supply and apply two layers of waterproofing membrane SBS 4mm thick.
pre order
SAB Liquid Membrane - Rubber Modified Liquid W/P Membrane
SAB® Liquid waterproofing system for wet area:
1- Liquid applied polyurethane waterproofing membrane - UV resistant (2) coat
pre order
Delivery with in 6 days
SAB® Crystalline Waterproofing Coating CP 212
367.50 AED 367.50 AED 367.5 AED
is a one component, capillary crystalline, waterproof coating, which waterproofs concrete structures by forming insoluble crystals in concrete capillaries.
Delivery with in 2 days
Asmaco Rapid Fix Sprayable Rubber Adhesive
137.55 AED 137.55 AED 137.55 AED
is a multi-substrate spray adhesive prepared from synthetic rubber and special additives developed for foam and matrasses industries
Delivery with in 5 days
SAB Bonding Spadbond PVA 218
68.25 AED 68.25 AED 68.25 AED
Is an opaque aqueous white liquid, externally plasticized polyvinyl acetate emulsion of medium to high viscosity
SAB® Cold Bituminous Primer One Layers
Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer
pre order
Delivery with in 5 days
SAB Emulsified Bituminous Rubberized 10
49.35 AED 49.35 AED 49.35 AED
Is an emulsified bituminous coating modified with 10% rubberized polymer content
SAB®Tron Insulation System™ DCL Green Building
Responding The Green Building Regulation.

Supply and apply of approved quality waterproofing system for roof (Combo Roofing System) .

1- Polyurethane foam for thermal insulation , 65-70 mm thick and density 40-45 Kg/m3.
2- Rubberized bitumen (2) coat. UV Protection coat.
3- Geotextile /Separation Layer 100 g/m2
4- Concrete screed (26N / MM2 - 300 OPC, 70MM AVE. Thick.) without ice.
5- Angle fillet (cement sand mortar ).
6- filler board/flexible sheet .
7- Expansion joint filter (Backing rod and Pu sealant).
8- Acrylic Top coat final .
pre order
Delivery with in 5 days
Delivery with in 2 days
Harwal Rigid Polyurethane Spray Foam Insulation
4,984.35 AED 4,984.35 AED 4984.35 AED
Poly - 3040 220kg & ISO- ISOHAR 250KG
New!
SAB Substructure - Protection board - 6mm
1- Supply and Apply Substructure Protection Board 6 mm
pre order

New Products

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.