1. All Products
  2. SAB Tex 2000 Rubberized Bitumen18kg
Public Pricelist

SAB Tex 2000 Rubberized Bitumen18kg

https://sab-gate.com/web/image/product.template/1304/image_1920?unique=78078d5

High Performance Rubberized Bitumen Emulsion Coating

105.00 AED 105.0 AED 105.00 AED

100.00 AED

    This combination does not exist.

      Terms and Conditions
    - Prices excluding delivery costs.
    - The above price may vary depending on the availability of raw material price, delivery and minimum order quantity.

            

    Delivery with in 3 days
    RBE Bituminous Damp Proof SAB® Materials

    Related Blogs

    SAB® Shams Al Bawadi

    Insulation Systems

    Is an emulsified bituminous coating modified with a minimum 18% rubberized polymer content. 
    This high-performance emulsion dries to form a tough and seamless, flexible water and vapor proof protective coating.

    Can be used for a wide variety of applications, which includes the following:

    • Waterproofing & Protective Coating on concrete foundations.
    • As dampproof membrane in general construction.
    • Waterproofing in wet areas such as toilets, kitchens etc.
    • General vapor proof coating for both interior -exterior floors & walls.
    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
    • For waterproofing most building surfaces e.g. 
    • roofs, foundations, 
    • retaining walls
    •  swimming pools
    • planters
    •  wet room floors
    •  water tanks etc.
    • Cold­ applied.
    • Single ­component.
    • Easy ­to ­apply.
    • Can ­be ­applied ­on ­damp­ substrates.
    • Asbestos­ free, ­odorless. ­Non-toxic, environmentally friendly.
    • Can­ be­ applied in closed or ­confined spaces.
    • ­Low ­VoC.
    • Resistant­ against ­chloride­ and­ sulphate ions.
    • Good­ adhesion ­to ­most ­building ­substrates.
    • Seamless/joint ­free


    It is highly recommended to apply a priming coat prior to the application of the SAB Tex 2000 Rubberized 18 coating on the substrate. 
    The primer can be prepared in the site by diluting SAB Tex 2000 Rubberized 18 with 20% water and applying this diluted coat as the primer.
    For very dry and porous substrates apply two coats of this primer. 
    The primer can be applied to damp or freshly cast concrete surface also. However, it should not be applied on waterlogged or flowing water areas.

    The rate will depend on the porosity of the substrate. 
    The following coverage rates can be expected when the coating applied at different coverage rates: 2 - 3m²/L/coat.

    18kg pails
    Store out of direct sunlight, clear of the ground on pallets.
    Shelf life is 12 months when stored as above.

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.