is an advanced waterproofing membrane designed to protect buildings from moisture infiltration. Its polymer-modified bitumen formulation offers exceptional flexibility and durability

Roof Waterproofing / SAB® Mineral (Membrane) System:
1-One coat of bituminous primed surface.
2-One layer of APP Plain Membrane 4mm thick 180 g/m2.
3-One layer of APP Mineral Membrane 4mm thick 180 g/m2.

1- Supply and apply a layer of polystyrene, 5 cm thick, with a thickness of 30 to 35 kg/m3 on the entire surface and around the requirements of air conditioning machines, tanks, and the likewise.
2- Supply and apply of gravel (concrete 3/4), 5 cm thick.

Supply and Apply (2) coats of Liquid applied Silicone waterproofing, UV-resistant

A Bitumen Filler Board is a board that is used to fill the gaps between the bitumen and the road surface. It is typically made from a combination of wood and asphalt. The wood is usually pressure treated to prevent rot and decay. The asphalt is used to provide a waterproof layer and to provide a smooth surface for the road. The board is typically made from a combination of wood and asphalt. The wood is usually pressure treated to prevent rot and decay.

Supply and apply one layer of Protection Board 4mm thick.

.

Construction Joints WaterStop is a product designed to prevent water from entering a joint in a construction project. It is made of a flexible, waterproof material that can be easily installed and removed without damaging the surrounding structures. The product is available in a variety of sizes and colors to match the aesthetic of any project.

Supply & Apply Coating of Containment Areas and Tanks

Foam concrete is a revolutionary material that is revolutionizing the construction industry. It is a lightweight, low-cost, and highly durable material that is made from a mixture of cement, water, and air. Unlike traditional concrete, foam concrete is a self-contained material that is easy to install and requires no additional tools or materials. It is also a green material that is made from natural ingredients and is highly resistant to weathering and erosion.

Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coat of cold Bituminous Primer
2 - Second coat of cold Bituminous Primer

Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer

Supply & Apply of the Liquid Silicone Waterproofing Coating per M²

Supply & apply Protection Screed 50mm Thick - 250 OPC - per M²

Imagine a world where you can enjoy the great outdoors without worrying about the elements. With SAB® Waterproofing system for Domes, you can create a safe and comfortable environment that shields you from the harsh weather. Our innovative system is designed to withstand the toughest conditions, so you can relax and enjoy the great outdoors without worrying about the elements. With SAB® Waterproofing system for Domes, you can create a safe and comfortable environment that shields you from the harsh weather.

is a versatile, self-adhesive membrane that is designed to provide a watertight seal for a wide range of applications. It is made from a high-quality rubber bitumen that is reinforced with a strong polyester fabric to provide added strength and durability. The membrane is easy to install and can be used for both new construction and retrofitting.

Supply and apply one layer of Protection Board 3.2mm thick.

is a comprehensive, high-performance, and cost-effective solution for preventing water damage in buildings. It is a versatile, flexible, and easy-to-install system that can be used in both new and existing construction. The system is designed to provide long-term protection against water damage and mold growth in the most demanding environments. It is a reliable and sustainable solution that can be used in residential, commercial, and industrial applications.

Liquid Insulation System is a high-performance, easy to apply and can be applied to vertical and horizontal surfaces.

concentrate and other support material.
1 Properly clean the work area from any impurities
2 Spray the side to be insulated with water, One of the characteristics of this material is that it requires a humid area to cause the required strong reaction.
3The first layer dedicated to closing the openings and areas connecting the concrete is implemented.
4 The crystal layer is placed against waterproof to coat all surfaces for waterproofing

ROOF WATERPROOFING / SAB® PRO 111 (MEMBRANE) SYSTEM:
1-Execute slope corners (skirting) 20cm*20cm along with the barbate.
2-Execute a Cavity 1.5*1.5 cm, along with the barbate over the skirting.
3-One coat of bituminous primed surface.
4-One layer of Membrane APP 4mm thick, 180 g/m2
5-Screed Concrete, 80mm Avg. 20/N - OPC 300 kg/m3
6-Execute slope corners 20cm*20cm along with the barbate.
7-Remove the ridges, then fill them with a sponge.
8-Supply and apply 1.5x1.5 cm mastic over the sponge.

1- Supply and apply one coat of cold Bituminous Primer
2- Supply and apply one layer of 4mm thick SBS Membrane

Supply and apply the approved quality liquid waterproofing Cementitious system for all wet areas:-
1- Supply And Apply 2 coats of Cementitious Waterproofing.

Roof Waterproofing / SAB® Mineral (Membrane) System:
1-One coat of bituminous primed surface.
2-One layer of APP Mineral Membrane 4mm thick 180 g/m2

Supply and apply the approved quality system for pile head treatment and insulation 500 mm DIAMETER:-
1- Repair surface with cementitious grout
2- Treatment by using (Fosroc) super cast DC and super cast EP10

1- Polyurethane foam spray 30-35mm
2- Acrylic top coat spray (LAITE GREEN)

[330] SAB® Tron Insulation System, Combo Roof System
The RAK Green Building Regulation (Barjeel)
Supply and apply the approved quality waterproofing system for the roofs (Combo Roofing System).
1- Polyurethane foam, 60mm thick, and density of 40-45 kg/m³. ( UV 0.3 W/m²K ).
2- Acrylic - Liquid UV protection coat (600mic.Thick).
3- Geotextile /Separation Layer 100 g/m²
4- expansion separator material Fiberboard -at least 10 mm thick & no more than 16 square meters
5- Concrete screed (20N/M³ - 300 OPC, 80mm AVE. Thick.) without (Ice&Fibre)
6- Angle fillet (cement sand mortar ).
7- Remove the filler board/flexible sheet -stage (4).
8- Expansion joint filter (Backing rod and Pu sealant).
9- Acrylic Topcoat final

per square meter
1mm-1.5mm Hand Applied, Rapid Curing Polyurea Waterproofing Membrane.

A service for smoothing concrete surfaces in factories and warehouses, used after "1-4" hours of pouring.

1- Supply and Apply Substructure Protection Board 6 mm

1- Supply and apply one coat of cold Bituminous Primer
2- Supply and apply two layers of 4mm thick SBS Membrane

SAB® Tron Insulation System (SZHP) 155 Combo roof is a high performance, low-thermal conductivity roof system. It is designed to provide superior thermal insulation and energy efficiency. The system is designed to be used with a variety of roof types, including metal, tile, and sloped roofs. The SZHP 155 Combo roof is a cost-effective solution for residential and commercial buildings.

SAB® Liquid waterproofing system for wet area:
1- Liquid applied polyurethane waterproofing membrane - UV resistant (2) coat

The SAB®Tron Insulation System™ DCL Green Building Product is a revolutionary, high-performance insulation system that combines the latest advancements in thermal science with innovative design. It is the only insulation system that offers superior thermal performance, air quality, and structural integrity, all in a single, easy-to-install system.

The SAB® Tron Insulation System 300 Combo System is a complete insulation system designed to provide superior thermal performance and energy efficiency. The system is comprised of a combination of SAB® 300 and SAB® 300 Plus insulation products, which are made from high-quality glass fiber. The system is designed to provide superior thermal performance and energy efficiency, and is suitable for use in a wide range of applications.

High Performance Rubberized Bitumen Emulsion Coating

Two Component Polymer Modified Flexible Cementitious Waterproof Coating

SAB® GP Adhesive 2170 is a two-component, low-odor, fast-curing adhesive that is designed to meet the most demanding requirements of the aerospace industry. It is formulated with a unique blend of high-quality raw materials to provide superior performance and reliability. SAB® GP Adhesive 2170 is easy to use and offers excellent bonding strength to a wide range of materials, including composites, metals, and plastics.