Category

Categories
SAB® Tron Insulation System, Barjeel
The RAK Green Building Regulation (Barjeel)
Supply and apply the approved quality waterproofing system for the roofs (Combo Roofing System).

1- Polyurethane foam, 60mm thick, and density of 40-45 kg/m³. ( UV 0.3 W/m²K ).
2- Acrylic - Liquid UV protection coat (600mic.Thick).
3- Geotextile /Separation Layer 100 g/m²
4- expansion separator material Fiberboard -at least 10 mm thick & no more than 16 square meters
5- Concrete screed (20N/M³ - 300 OPC, 80mm AVE. Thick.) without (Ice&Fibre)
6- Angle fillet (cement sand mortar ).
7- Remove the filler board/flexible sheet -stage (4).
8- Expansion joint filter (Backing rod and Pu sealant).
9- Acrylic Topcoat final
pre order
SAB® Mineral
ROOF WATERPROOFING / SAB® MINERAL (MEMBRANE) SYSTEM:
1-One coat of bituminous primed surface.
2-One layer of APP Mineral Membrane 4mm thick 180 g/m2
pre order
SAB Cementitious Wet Area Waterproofing System
Supply and apply the approved quality liquid waterproofing Cementitious system for all wet areas:-
1- Supply And Apply 2 coats of Cementitious Waterproofing.
pre order
SAB Crystal 410
SAB® Crystal 410 concentrate and other support material.
• Properly clean the work area from any impurities
• Spray the side to be insulated with water, One of the characteristics of this material is that it requires a humid area to cause the required strong reaction.
*The first layer dedicated to closing the openings and areas connecting the concrete is implemented.
*The second layer is applied to paint all surfaces to be insulated
pre order
SAB® 3ACTION
1- Polyurethane foam spray 30-35mm
2- Acrylic top coat spray (LAITE GREEN)
pre order
SAB® Active(Polyurea)
per square meter
1mm-1.5mm Hand Applied, Rapid Curing Polyurea Waterproofing Membrane.
pre order
SAB® Pile Head Treatment & Insulation
Supply and apply the approved quality system for pile head treatment and insulation 500 mm DIAMETER:-
1- Repair surface with cementitious grout
2- Treatment by using (Fosroc) super cast DC and super cast EP10
pre order
SAB® Cold Bituminous Primer Two Layers
Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coat of cold Bituminous Primer
2 - Second coat of cold Bituminous Primer
SAB® PRO 300 Membrane & Screed
ROOF WATERPROOFING / SAB® PRO 111 (MEMBRANE) SYSTEM:
1-Execute slope corners (skirting) 20cm*20cm along with the barbate.
2-Execute a Cavity 1.5*1.5 cm, along with the barbate over the skirting.
3-One coat of bituminous primed surface.
4-One layer of Membrane APP 4mm thick, 180 g/m2
5-Screed Concrete, 80mm Avg. 20/N - OPC 300 kg/m3
6-Execute slope corners 20cm*20cm along with the barbate.
7-Remove the ridges, then fill them with a sponge.
8-Supply and apply 1.5x1.5 cm mastic over the sponge.
pre order
SAB® Power Floating Concrete
Concrete Smoothing
pre order
Protection Screed Multi Thick
Supply & apply Protection Screed 50mm Thick - 250 OPC - per M²
pre order
SAB Liquid Silicone Gutter Waterproofing Coating
Supply & Apply of the Liquid Silicone Waterproofing Coating per M²
pre order
SAB® Substructure One Layer
SAB® Substructure One Layer
1- Supply and apply one coat of cold Bituminous Primer
2- Supply and apply one layer of 4mm thick SBS Membrane
pre order
SAB Substructure Two Layers
Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer
2 - Supply and apply two layers of waterproofing membrane SBS 4mm thick.
pre order
SAB Liquid Membrane - Rubber Modified Liquid W/P Membrane
SAB® Liquid waterproofing system for wet area:
1- Liquid applied polyurethane waterproofing membrane - UV resistant (2) coat
pre order
SAB® Cold Bituminous Primer One Layers
Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer
pre order
SAB Substructure - Protection board - 6mm
1- Supply and Apply Substructure Protection Board 6 mm
pre order
Foam Concrete
Foam concrete is a revolutionary material that is revolutionizing the construction industry. It is a lightweight, low-cost, and highly durable material that is made from a mixture of cement, water, and air. Unlike traditional concrete, foam concrete is a self-contained material that is easy to install and requires no additional tools or materials. It is also a green material that is made from natural ingredients and is highly resistant to weathering and erosion.
pre order

New Products

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.