1. All Products
  2. Anchor Prime P1 (500 ml) per piece (12pcs/CTN)
Public Pricelist

Anchor Prime P1 (500 ml) per piece (12pcs/CTN)

https://sab-gate.com/web/image/product.template/1759/image_1920?unique=f725147

is a low viscosity one component solvent based priming system for concrete joints prior to the application of joint sealants.

231.00 AED 231.0 AED 231.00 AED

220.00 AED

    This combination does not exist.

      Terms and Conditions
    Prices excluding delivery costs
            

    Sealant 600ml Asmaco


    Preparation:
    All surfaces must be free from old joint sealants, oil, grease, freestanding water, or any loosely adherent material.

    Application:
    The ambient and substrate temperatures need to be above 5°C both before and after the application of the primer. Agitate the primer contents thoroughly by shaking the container for 30 seconds. Apply an even coat of primer by brush onto the bonding faces of the concrete. Ensure that there is no primer residue present at the base of the joint after the primer has been applied. Allow the primer to become touch dry before applying any sealant (typically 20 minutes at 25°C). Do not apply sealant to wet or tacky primer. The sealant must be applied within 8 hours at normal temperatures.

    is used to prime prepared concrete joint edges prior to the application of  ANCHORSEAL 963 PG/GG , which includes Pouring Grade and Gun Grade Polysulphide joint sealants.
     
    - If the joints are to be immersed or subjected to long-term moisture, please consult the technical department of SAB for special priming recommendations.

    Start with the customer – find out what they want and give it to them.

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.