Henkel Polybit Solvent Based Bitumen Primer

Polyprime SB is a quick drying solvent based low viscosity bitumen primer

147.00 AED 147.0 AED 147.00 AED

1.00 AED

Volume
- 20 Ltr + 145.95 AED
- 200 Ltr + 1,039.50 AED

This combination does not exist.

ADD TO CART Inquiry BUY NOW

Terms and Conditions
Prices excluding delivery costs

Delivery with in 2 days

Polyprime SB is a quick drying solvent based low viscosity bitumen primer.
It is used as a primer coat on masonry and concrete substrates to improve the adhesion of bitumen based membranes and coatings.
Polyprime SB is low in viscosity, which allows it to penetrate into the concrete pores and improve the adhesion between the membrane and the concrete surface. In addition to that, the primer also acts as a binder for the dust particles which gets accumulated on the concrete surface even after cleaning.

TDS

Mix the contents of the pail or drum for a few minutes to remove any sediments.
apply the primer @4-6 m²/L to a clean smooth and dry surface by brush/roller.
Allow the primer to dry prior to the application of the membrane.
For highly porous surfaces application of a second coat is recommended.

Improves the adhesion between bitumen based sheet membranes and coatings
Cold applied, does not require heating
Binder for dust particles
Anti corrosive
Conforms to the following standards
ASTM D 41 - Asphalt primer for roofing, damp Proofing and waterproofing
BS 3416, Type A Class C - Bitumen based coatings for cold application, suitable for use in contact with potable water