20 L
Single component product that upon curing forms a tough and flexible coating which is resistant to UV and other weathering agents.

28kg (20ltr)
is an aliphatic, one component, liquid applied, moisture-cured, polyurethane surface and waterproofing coating

is supplied as a ready to use blend of dry powders, which requires only the addition of clean water to produce a highly consistent repair mortar suitable for structural concrete and masonry repairs

Supply and apply the approved quality system for pile head treatment and insulation 500 mm DIAMETER:-
1- Repair surface with cementitious grout
2- Treatment by using (Fosroc) super cast DC and super cast EP10

25kg
is a durable mono-component micro concrete made of selected sand and aggregates, special cement, green binders and additives.

27.8 kg
is a three-component epoxy mortar. It is mainly used for pile capping. It has high bonding power, and high mechanical strength.

is used as a primer and sealer coat prior to the application of bitumen based waterproofing membranes and coatings.

Grey is 25kg/bag White is 20kg/bag
is a polymer modified dry mix adhesive for fixing of ceramic tiles on walls and floors. It is single component, non-hazardous and environment friendly.

Roof Waterproofing / SAB® Mineral (Membrane) System:
1-One coat of bituminous primed surface.
2-One layer of APP Plain Membrane 4mm thick 180 g/m2.
3-One layer of APP Mineral Membrane 4mm thick 180 g/m2.

Highly Elastomeric SBS Modified Bitumen Jellified Emulsion Waterproofing Coating

is a low viscosity one component solvent based priming system for concrete joints prior to the application of joint sealants.

is a two-component system consisting of pure polyurea. Contains 100% solvent free, 100% solids.

is designed for the production of sprayed foams for cavity filling, with an applied density of
45kg/m3. The reaction of AWAZEL PU 4045 POLYOL and AWAZEL PU 111 ISOCYNATE gives foams with good mechanical properties, dimensional stability and good adhesion to usual substrates

is a high performance ready to use, cold applied, high build liquid waterproofing membrane

is a high strength epoxy mortar, based on a high quality solvent-free epoxy resin system

is an advanced waterproofing membrane designed to protect buildings from moisture infiltration. Its polymer-modified bitumen formulation offers exceptional flexibility and durability

Dolphin B2 Fire Retardant (Flame Retardant) PU Foam is an excellent quality polyurethane foam.

is the standard roofing and waterproofing membrane, reinforced with either a core of non-woven polyester

2.5ltr
is a two-part Polysulphide Sealant which cures once the two components are mixed to give a flexible rubber seal. It
has good adhesion to concrete and many other common building substrates.