per square meter
1mm-1.5mm Hand Applied, Rapid Curing Polyurea Waterproofing Membrane.

Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer

Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coat of cold Bituminous Primer
2 - Second coat of cold Bituminous Primer

is a one component, capillary crystalline, waterproof coating, which waterproofs concrete structures by forming insoluble crystals in concrete capillaries.

ROOF WATERPROOFING / SAB® MINERAL (MEMBRANE) SYSTEM:
1-One coat of bituminous primed surface.
2-One layer of APP Mineral Membrane 4mm thick 180 g/m2

Two Component Polymer Modified Flexible Cementitious Waterproof Coating

ROOF WATERPROOFING / SAB® PRO 111 (MEMBRANE) SYSTEM:
1-Execute slope corners (skirting) 20cm*20cm along with the barbate.
2-Execute a Cavity 1.5*1.5 cm, along with the barbate over the skirting.
3-One coat of bituminous primed surface.
4-One layer of Membrane APP 4mm thick, 180 g/m2
5-Screed Concrete, 80mm Avg. 20/N - OPC 300 kg/m3
6-Execute slope corners 20cm*20cm along with the barbate.
7-Remove the ridges, then fill them with a sponge.
8-Supply and apply 1.5x1.5 cm mastic over the sponge.

Supply and apply the approved quality system for pile head treatment and insulation 500 mm DIAMETER:-
1- Repair surface with cementitious grout
2- Treatment by using (Fosroc) super cast DC and super cast EP10

Concrete Smoothing

One coat of cold Bituminous Primer
One layer 4mm thick SBS Membrane

• Polyurethane foam for thermal insulation, 150-• • • •
• 155 mm thick and density, 45-50 Kg/m3.
• Liquid U.V protection coat (600mic.Thick).
• Geotextile /Separation Layer 120 g/m2
• Filler board/flexible sheet & cement stand mortar.
• Concrete screed (25N / MM2 - 300 OPC, 80MM AVE. Thick.) without ice.
• Angle fillet (cement sand mortar and SBR bonding agent).
• Expansion joint filter (Backing rod and Pu sealant).
• Acrylic Top coat final .

Supply and apply of approved quality waterproofing system for the roof (Combo Roofing System).

1- Polyurethane foam, 30 mm thick and density 40-45 Kg/m3.
2- Acrylic - Liquid protection coat (600mic.Thick).
3- Geotextile /Separation Layer 100 g/m².
4- Filler board/flexible sheet.
5- Concrete screed (20N / MM² - 300 OPC, 80MM AVE. Thick.) without ice.
6- Angle fillet (cement sand mortar ).
7- Expansion joint filler (Backing rod + Pu sealant).
8- Acrylic Topcoat final. (light Green).

The RAK Green Building Regulation (Barjeel)
Supply and apply the approved quality waterproofing system for the roofs (Combo Roofing System).

1- Polyurethane foam, 60mm thick, and density of 40-45 kg/m³. ( UV 0.3 W/m²K ).
2- Acrylic - Liquid UV protection coat (600mic.Thick).
3- Geotextile /Separation Layer 100 g/m²
4- expansion separator material Fiberboard -at least 10 mm thick & no more than 16 square meters
5- Concrete screed (20N/M³ - 300 OPC, 80mm AVE. Thick.) without (Ice&Fibre)
6- Angle fillet (cement sand mortar ).
7- Remove the filler board/flexible sheet -stage (4).
8- Expansion joint filter (Backing rod and Pu sealant).
9- Acrylic Topcoat final

Responding The Green Building Regulation.

Supply and apply of approved quality waterproofing system for roof (Combo Roofing System) .

1- Polyurethane foam for thermal insulation , 65-70 mm thick and density 40-45 Kg/m3.
2- Rubberized bitumen (2) coat. UV Protection coat.
3- Geotextile /Separation Layer 100 g/m2
4- Concrete screed (26N / MM2 - 300 OPC, 70MM AVE. Thick.) without ice.
5- Angle fillet (cement sand mortar ).
6- filler board/flexible sheet .
7- Expansion joint filter (Backing rod and Pu sealant).
8- Acrylic Top coat final .

is an acrylic co-polymer based incorporated with hollow ceramic micro-spheres

is a High Tech / High Performance pure acrylic liquid applied thermal insulation and energy saving paint/coating

is a High Tech / High Performance liquid applied thermal insulation and energy saving roofing coating system

forms an elastomeric heat barrier by, resisting over 95% of UV

woven from C-Fiberglass yarn, then coated with adhesive acrylic latex

A high performance elastomeric waterproofing membrane

APP modified bituminous membrane - Plain

is a 1-component liquid applied membrane made of polyurethane specially designed for waterproofing

Box 20pcs

3 layers, five years warranty

3 layers, five years warranty

It is made of a polytetrafluoroethylene (PTFE) film tape

Flexicoat is a liquid acrylic elastomeric waterproof coating for roofing applications

is a one pack, economical roof coating. It provides a flexible waterproof coating with good weather resistance