1. All Products
  2. Waterproofing Materials
  3. Isomat Durocret Penetrate, Crystalline waterproofing, 25kg
Public Pricelist

Isomat Durocret Penetrate, Crystalline waterproofing, 25kg

https://sab-gate.com/web/image/product.template/1373/image_1920?unique=fd0a360

Repairing and waterproofing cement mortar with crystallizing effect

367.50 AED 367.5 AED 367.50 AED

350.00 AED

    This combination does not exist.

      Terms and Conditions
    Prices excluding delivery costs
            

    Delivery with in 2 days
    Swimming Pools Crystalline Waterproofing Foundation Isomat


    DUROCRET-PENETRATE is a pre-mixed, cement-based mortar, without corrosive ingredients, suitable for indoor and outdoor applications. 
    It consists of special active chemicals, which in contact with moisture and the present hydroxide of lime, react and form insoluble bonds (crystals). These crystals block the capillary pores and seal the shrinkage cracks inside the concrete, so as to prevent any further water absorption. It offers: 

    • High compressive and flexural strength 
    • Abrasion resistance. 
    • Very good bond strength to the substrate. 
    • Simplification of works. 
    • Continuous protection of the construction from water presence as it remains permanent active. 
    • Excellent bond strength to concrete, under both positive and negative water pressure. 
    • Sealing of hair cracks with width up to 0,4 mm, even if they appear afterwards. 
    • Protection of the construction from corrosion of the reinforcement steel of concrete. 

    There is no influence on the waterproofing of construction, in case of damaging the concrete surface or DUROCRET-PENETRATE. It does not affect the vapour permeability of concrete. It has a simple and low-cost application. It is classified as a CC R3 type mortar, for concrete repairs, according to EN 1504-3

    1. Substrate 
    The substrate should be clean, free of dust, oily or loose materials etc. Very smooth surfaces should be treated with mild sand blasting or waterblasting, or carefully with chemical wash-up with 15% hydrochloric acid. Water leaks should be plugged with AQUAFIX rapid setting cement. 
    The surface should be dampened, before the application of DUROCRET-PENETRATE. 

    2. Application
     DUROCRET is added into the exact recommended water quantity, under continuous stirring, until a homogenous mixture is formed. The material is applied using a trowel as usual. 
    After the end of application, the final surface must be treated for the next 2-3 days, so as for the waterproofing layer to remain slightly wet and harden properly. 

    Damping of the surface should be done by the time DURICRET-PENETRATE has started hardening in order to avoid the possibility of damages. Usually 2-3 times water spraying is enough per day. The applied surface should be protected from rain and frost.

    DUROCRET-PENETRATE combines two actions in one product, repair and waterproofing. It is used for concrete or brickwork repair and patching, groove formation etc. 
    It is suitable for repairs of basements, foundations, manholes, water tanks, sewage tanks, before the application of the brushable sealing slurry AQUAMATPENETRATE.

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.