1. All Products
  2. Pidilite Dr. Fixit Crack X Powder 202, Crackfilling
Public Pricelist

Pidilite Dr. Fixit Crack X Powder 202, Crackfilling

https://sab-gate.com/web/image/product.template/1517/image_1920?unique=f367d8c

10 pic A Non-Shrink, High Strength Powder Crack Filler for Surface Cracks in Plaster

    This combination does not exist.

    Submit

      Terms and Conditions
    Prices excluding delivery costs
            

    Delivery with in 2 days
    Pidilite

    Related Blogs

    Pidilite MEA Chemicals

    manufacture of high performance construction chemicals

     
     


    r is a cement based polymer modified powder material for filling cracks in plastered surface. It is composed of cement, properly selected aggregates, polymer & additives which requires on site addition of water only. It is ideal to fill 3 to 5 mm wider static cracks, for leveling up walls before tiling and for skimming expanded polystyrene and asbestos because it has strong adhesion, is non-shrink in nature, good water resistance properties & weathering durability. Cracks filled with Dr. Fixit Crack-X Powder enhances the subsequent paintings quality and life.

    • To fill the static cracks of 3 to 5 mm sizes in horizontal or vertical areas of buildings & structures. 
    • To level the undulation of the unplastered or plastered ceilings and walls before painting. 
    • To provide smooth finish to brick, stone, and wood works. 
    • As an excellent sculpting material. 
    • Mixed with mineral wool, Unifiller can be used for pipe lagging in awkward places

    1 Surface Preparation 

    • Remove old caulk from joints. The edges of the joints should be neat and sound. 
    • Make sure that surface is clean & free from puddle of water. 
    • The surface should be free of loose debris. 
    • Contaminations of oil, grease or bitumin should be completely cleaned. 
    • Damp wood should be allowed to dry out and decayed wood should be removed. 
    • Roughen smooth surfaces to give a good key.

    2 Application

    • For crack filling – Fill the mixed paste into the crack by spatula or putty knife blade. Fill excess material and tool it by putty knife blade pressing against crack so that air voids get filled. By wet finger tool the surface of material in to a concave nature by pressing against joint edges. 
    • For Surface leveling – The mixed smooth paste should be applied by painter blade on the dampened wall or ceiling. The material should be applied at the desired thickness in bottom- to -up fashion to avoid blade marks. For multiple coat applications the previous coat should be allowed to cure for minimum 6 hrs. The subsequent coat should be at the right angle to the previous coat. 
    • For wood grain & pipe lagging – For wood grain, apply the buttery consistency mixed material by brush. Mix mineral wool with the buttery mix for pipe lagging & awkward places.

    Coverage
    18-20 running meters/kg for 5 mm x 5 mm groove

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.