Velosit RM 211 Crystalline repair mortar

VELOSIT RM 211 - a top-of-the-line crystalline cementitious repair mortar designed specifically for concrete restoration. This exceptional product boasts a unique formulation that enables it to create a remarkably smooth surface, making it an ideal choice for use in conjunction with crystalline waterproof coatings.

Crafted with the utmost attention to detail and using only the finest quality ingredients, VELOSIT RM 211 is a premium-grade repair mortar that is second to none.
Its advanced composition ensures that it is highly effective in repairing and restoring damaged concrete structures, providing a durable and long-lasting solution for all your concrete restoration needs.

Whether you're looking to repair cracks, fill holes, or restore the surface of your concrete structure, VELOSIT RM 211 is the perfect choice. It is easy to apply, dries quickly, and offers exceptional adhesion, ensuring that your repairs will be strong, reliable, and long-lasting.

So if you're looking for a high-quality, reliable, and effective solution for your concrete restoration needs, look no further than VELOSIT RM 211.
With its superior quality and exceptional performance, it is the perfect choice for any project, big or small.

Some of the unique features of VELOSIT RM 211 are:

- Excellent adhesion to properly prepared concrete
- Good resistance against CO2 and Chloride penetration due to a very tight pore structure
- Good resistance against aggressive media with a pH range of 3-12 and against soft water with low ion content
- Good weathering resistance
- Good sulfate resistance
- Light gray color close to concrete color
- Minimal shrinkage/expansion under dry/wet curing conditions minimizing the risk of micro-cracking
- Fiber reinforced
- 45 min. working time and 1740 psi (12 MPa) compressive strength after 4 hours
- Final strength of more than 5800 psi (40 MPa) after 28 days
- Open to foot traffic after 3-4 hours

1. Substrate preparation: The substrate must be prepared with sand blasting, shot blasting, or high-pressure water blasting to remove all bond-breaking substances. Remove all carbonated concrete. Test with Phenolphthalein or other suitable indicator until concrete with sufficient alkalinity for rebar protection is reached. If rebar is exposed, remove concrete at least 1/4” (6mm) behind rebar to fully embed the steel into VELOSIT RM 211. Substrate must be rough, open porous, and load-bearing

2. Mixing: Mix VELOSIT RM 211 with 17 -20% potable water, i.e. 1.1 – 1.3 gal (4.3-5 l) water per 55 lb (25 kg) bag. Fill 17% mixing water (1.1 gal per bag) into a suitable bucket and mix the powder with a slow speed drill (300-600 rpm) into the water until a lump-free mix is achieved. Add more water under stirring to adjust desired consistency. The product is workable for 45 min. at 70°F

3. Trowel application: Apply a slurry coat of VELOSIT RM 211 by scrubbing material with a wet sponge into the concrete surface. Trowel VELOSIT RM 211 fresh in fresh into the slurry coat. The product can be applied up to 6”. Make sure to work in sections that can be finished within 30 min. Rebars and other penetrations must be fully embedded into the mortar

4. Spray application: Use suitable spray machines such as Inotec GmbH: INOMAT-M8. In mixing pumps feed the powder into the product hopper and adjust the water to the desired consistency. With mortar pumps add the mixed product as described above into the feed hopper of the spray machine and spray continuously. If a smooth surface is required, follow with a trowel shortly after material is sprayed. Work in sections. Long spray interruptions may result in clogging of the spray hose. The product may cure a lot faster if the hose is exposed to direct sunlight. Always empty and flush the machine after spraying or before long spray interruptions. VELOSIT RM 211 is a fast-curing material and may be hard to remove if left in the machine

5. Curing: VELOSIT RM 211 does not require long-term curing as it reacts relatively quickly with water. Only under hot weather or very dry conditions water curing for 3-4 hours is required.

What is the final strength of VELOSIT RM 211 after 28 days?
The final strength of VELOSIT RM 211 after 28 days is more than 5800 psi (40 MPa).

How long does it take for VELOSIT RM 211 to be open to foot traffic?
According to the context, VELOSIT RM 211 is open to foot traffic after 3-4 hours.

What are the applications of VELOSIT RM 211?
The typical application fields for VELOSIT RM 211 are the repair of surface defects on concrete, overlays and repairs on concrete structures like dams, bridges, beams, balconies, facades, filling of blow holes, honeycombs and surface roughness, and application thickness from feather-edge to 6”.

What is VELOSIT RM 211 and what is it used for?
VELOSIT RM 211 is a crystalline cementitious repair mortar used for concrete restoration. It is used for repairing surface defects on concrete, overlays and repairs on concrete structures like dams, bridges, beams, balconies, facades, filling of blow holes, honeycombs and surface roughness. It creates a smooth surface for crystalline waterproof coatings. It is a shrinkage compensated mortar with quick strength development and excellent workability.

Velosit RM 211 Crystalline repair mortar 25kg/Bag

420.00 AED 420.0 AED 420.00 AED

400.00 AED

Related Blogs

New Products

Share

Follow us