1. All Products
  2. PENEBAR SW-45 Rapid Concrete Joint Waterstop 30M
Public Pricelist

PENEBAR SW-45 Rapid Concrete Joint Waterstop 30M

https://sab-gate.com/web/image/product.template/1247/image_1920?unique=10de525

is a unique bentonite infused butyl rubber sealing compound designed to expand rapidly when exposed to moisture

971.25 AED 971.25 AED 971.25 AED

925.00 AED

    This combination does not exist.

      Terms and Conditions
    Prices excluding delivery costs
            

    Delivery with in 3 days
    Water Stop Swimming Pools Construction Joint Penetron Maintenance

    Recommended for building foundations, slabs, retaining walls, storage tanks and other immovable cold construction joints, PENEBAR SW 45 is a unique sealing compound designed to expand rapidly when exposed to water.It is an ideal self-healing joint material for construction joint applications.


    • Building foundations 
    • Slabs 
    • Retaining walls 
    • Storage tanks 
    • Other similar non-moving cold construction joints

     1 Apply PENEBAR PRIMER by using brush at a minimum of 0.1 mm (4 mils) thick by 50 mm  wide over the entire surface length to receive PENEBAR SW-45 Rapid. 
    Allow it to dry for 10-15 minutes at a temperature of 25C (77F) or, where the temperatures are low, allow it to dry for a longer time. 

    2 By using the heel of the hand and moderate pressure, press a bead of PENEBAR SW-45 Rapid firmly into position on the standing structure. Make sure the product has bonded with the primed area. 

     3 Where required, splice ends to form a continuous, uninterrupted seal. 
    For best results, cut each end at opposite 45 angles and tightly butt ends together. 
    DO NOT OVERLAP ENDS. Gently knead the spliced ends creating an uninterrupted seal. 

     4 Peel the protective covering from the exposed side of the installed PENEBAR SW-45 Rapid. 5) Follow standard concrete placing procedures from here onwards

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.