Subsequent waterproofing of existing buildings according to WTA
Can be applied > 3 m below ground
Approved for connecting to water impermeable concrete structures
Waterproofing of plinths and base points
Waterproofing in a bond
Bonding layer on old bitumen coatings
For attaching perimeter insulation panels
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
At least 1.1 kg/m²/mm of dry coat thickness
Coat thicknesses and application rate when used as a crack-bridging MWG in interior and exterior areas: see application rate table under application examples. Apply to a large enough trial area to determine the precise amount required.
New Products
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
