Usage
Min. 1.3 kg/m²/mm dry layer thickness
Layer thickness and application rate when using as crack-bridging MWS for interiors and exteriors: see application rate table under Application Examples
Apply to a large enough trial area to determine the precise amount required.
Field of application
- Waterproofing in new buildings
- Can be applied > 3 m in the ground
- Connection to water-impermeable concrete structures
- Cross-sectional waterproofing in and under walls
- Wall base and render waterproofing
- Subsequent exterior waterproofing in existing buildings
- Bonding layer on old bitumen coatings
Properties
- Can be applied directly from the container without mixing
- Fast, crosslinker-assisted complete drying
- Can be activated extremely quickly if required for a rainproof surface in seconds
- Rapid bond adhesion, even on non-mineral substrates
- Very low emissions (GEV-EMICODE EC 1Plus)
- Radon-tight (verified through testing)
- Highly flexible, elastic and crack-bridging
- Water pressure tight
- Can be plastered and painted over
- Can be applied as a slurry, with a brush or trowel, or by spraying
- Freeze/thaw-resistant
