1. All Products
  2. SikaSwell® A (formerly known as MasterSeal® 910 AP) Water swelling waterbar for joints
Public Pricelist

SikaSwell® A (formerly known as MasterSeal® 910 AP) Water swelling waterbar for joints

https://sab-gate.com/web/image/product.template/1214/image_1920?unique=6885797

20mmx10mmx5m
Hydrophillic pre-formed swelling waterstop system for joints between concrete elements

173.25 AED 173.25 AED 173.25 AED

165.00 AED

    This combination does not exist.

      Terms and Conditions
    - Prices excluding delivery costs.
    - The above price may vary depending on the availability of raw material price, delivery and minimum order quantity.

            

    Delivery with in 3 days
    Water Stop Swimming Pools Construction Joint MasterProtect

    TDS

    MasterSeal 910 Waterbar is suitable for all construction joints subject to hydrostatic pressure, on one or both sides. MasterSeal 910 provide simple but efficient waterproofing of construction joints. Movements in the joint, e.g. by shrinkage or settlement in the substrate, are taken up by the elastic profile of the MasterSeal 910 Waterbar. MasterSeal 910 has been successfully employed to waterproof joints where an opening of up to 5mm was deliberately created. Water pressure of up to 5 bar was sealed. MasterSeal 910 is based on a newly developed polymer technology providing flexible polymer composites which have high chemical resistance capable of storing water in their molecular structure by increasing their volume. Where previously MasterSeal 910 was available in different grades for various exposure conditions. A single version of MasterSeal 910 now resists deterioration in the following conditions: In fresh water and where the water has a high salt content (sea water, brackish water), in construction with high chemical exposure and/or exposure of solvents, including oils and fuels. MasterSeal 910 is a component of the Master Builders Solutions pile-cap waterproofing and watertight jointing systems. Consult your representative for details

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    When in contact with water the MasterSeal 910 Waterbars will slowly increase in volume (swell) without changing the homogeneous structure of the polymer matrix. 
    The increase in volume by the swelling action can be up to 200% (depending on type of water). 
    The pressure of the swelling action will cause the MasterSeal 910 Waterbar to profile itself exactly into the joint filling all cavities and effectively stopping water seepage, even at high external water pressure. 
    The MasterSeal 910 Waterbars will not transport water through their polymer matrix and thus not act as a capillary duct. 
    The swelling action is limited to the sides exposed to water.

    Start with the customer – find out what they want and give it to them.

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.