1. All Products
  2. MasterSeal 618, bitumen 200L steel drum
Public Pricelist

MasterSeal 618, bitumen 200L steel drum

https://sab-gate.com/web/image/product.template/1212/image_1920?unique=06266a1

treats various roofing surfaces, including concrete, asphalt, metal

624.75 AED 624.75 AED 624.75 AED

595.00 AED

    This combination does not exist.

      Terms and Conditions
    Prices excluding delivery costs
            

    Delivery with in 3 days
    RBE Bituminous MasterProtect

    MasterSeal 618 is a non-fibrated rubberised bitumen emulsion coating that is suitable for the treatment of concrete, asphalt, metal, roofing felt, and other similar roofing surfaces whether flat, sloping or vertical.
    It is used for general damp-proofing of concrete, asbestos cement sheets, roofing felts, wood, etc. 
    It is a single component, solvent-free, and cold-applied coating that is easy to use and does not require skilled labor. It is supplied in 20 and 200-liter units.

    For slate roofs or where the roof is in poor condition, a reinforcing membrane should be incorporated into the coating. 
    The reinforcing fabric should be bedded in well to ensure good adhesion.

    The advantages of MasterSeal 618 are
    - Vapour permeable, allowing the substrate to breathe
    - Reduced chloride penetration due to hard impermeable surfaces
    - Simple and easy to use, no skilled labour required
    - Single component, use as supplied. Solvent-free
    - Cold applied, no heating required. Non-slumping
    - Easy application due to paintable consistency, suitable for new and old concrete

    MasterSeal 618 is suitable for the treatment of concrete, asphalt, metal, roofing felt, and other similar roofing surfaces whether flat, sloping or vertical. It is generally used for damp-proofing of concrete, asbestos cement sheets, roofing felts, wood, etc.

    Typical Properties
    The typical properties of MasterSeal 618 are:
    - Solids content: 35
    - Rubber content: 5
    - Specific gravity @ 25°C: 1.10
    - Drying times: Touch dry 2-3 hours, Hard dry 6 hours
    - Viscosity: 15-25 poises
    - Service temperature: -10°C to 85°C

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.