GrandSeal GRANDFLEX 80 Acrylic Polymer Modified Two Component Cementitious

GRANDFLEX 80 can be applied by a brush or roller to form a waterproof and flexible membrane. Apply the first coat with sufficient thickness to cover the holes, cracks etc., completely at a rate of 1- 1.2kg/m2. Once the first coat is dry apply second coat in order to achieve the required thickness at an average rate of 0.6-0.8 kg / m2 per coat for minimum thickness of 750microns. For general protection it is recommended that each coat should be a minimum thickness of 1mm. For heavy 6- 10mm depressions, honey combs etc. use less gauging liquid and mix to the desired consistency. Where more than one coat is found necessary to achieve the desired thickness, apply the second or subsequent coats after the previous coat has dried. Curing should be done immediately after the coating has attained its final set.

• General Construction Water and Damp Proofing for Basements and Concrete Structures.
• Suitable for swimming pools, lift holes, spillways, bathroom slabs, kitchen slabs, and other wet areas.
• Seals precast joints; high elongation accommodates sealing of precast joints.
• Provides water and damp-proof lining for water-retaining structures.
• Effective for waterproofing drinking water reservoirs, both interior and exterior.
• Offers protection for concrete against carbonation and chloride attack.
• Ideal for coating in seawater foundation protection.
• Suitable for waterproofing coatings for roofs and tunnels.
• Applicable for marine walkways, seawater channels, and more.