Grandseal GRANDFLEX 60 Two-Component, Acrylic Polymer Modified Cementitious Extra Flexible Water-Proofing System

APPLICATION SURFACE PREPARATION
The surface must be clean and free of oil, grease, dust, and any other unwanted residual materials. The area to be treated should be thoroughly wet prior to application (without any standing water).

MIXING
The material is supplied in two pre-measured parts, requiring on-site mixing. Slowly add the powder to the liquid and mix using a slow-speed drill fitted with a suitable paddle. Do not mix more material than can be used within 45 minutes. The resulting mixture should have a creamy consistency. Do not add water at any stage to loosen the material.

APPLICATION
GRANDFLEX 60 can be applied using a brush or roller to form a waterproof and flexible membrane. Apply the first coat with sufficient thickness to completely cover holes, cracks, etc., at a rate of 1.2-1.5 kg/m².

Once the first coat is dry, apply a second coat to achieve the required thickness at an average rate of 0.8 to 1 kg/m² per coat. For general protection, it is recommended that each coat has a minimum thickness of 1 mm.

• General Construction Water and Damp Proofing
• Suitable for basements.
• Ideal for swimming pools, lift holes, spillways, bathroom slabs, kitchen slabs, and other wet areas.
• Provides water and damp-proof lining for water-retaining structures.
• Effective for waterproofing drinking water reservoirs, both interior and exterior.
• Offers protection for concrete against carbonation and chloride attack.
• Applicable as a coating for seawater foundation protection.
• Suitable for waterproofing roofs and tunnels.
• Ideal for marine walkways, seawater channels, etc.
• Provides a waterproof background mortar for tiles, marble, granite, and similar materials.