1. All Products
  2. EnerSeal Tape, Nano Seal Technology, Heavy Duty Tape (50') Fleece 4inch
Public Pricelist

EnerSeal Tape, Nano Seal Technology, Heavy Duty Tape (50') Fleece 4inch

https://sab-gate.com/web/image/product.template/1658/image_1920?unique=e9a429c

EnerSeal Nano Seal Technology Heavy Duty Tape is a 4 inch wide tape with a 50 foot roll. It is designed to seal and repair leaks in pipes, ducts, and other applications. The tape is made with a heavy duty fleece material that is designed to withstand extreme temperatures and pressure. It is also designed to be UV resistant and water resistant. The tape is easy to use and can be applied to a variety of surfaces.

315.00 AED 315.0 AED 315.00 AED

300.00 AED

    This combination does not exist.

      Terms and Conditions
    Prices excluding delivery costs
            

    self-adhesive Tape


    EnerSeal Tape – Nano Seal Technology is an advanced permanent solution for virtually all types of leaking roofs and
    joints. It is a single step and quick set long-lasting solution for any water, vapor, and air leaks. EnerSeal Tape is a U.S.
    active sealant technology, which is based on various elastomeric polymers blended to form the strongest bond with
    the substrate and permanently stop the leak. 
    Elastomeric polymer adhesives are protected and backed by fleece,
    which provides additional flexibility when applied on intricate surface profiles.
    Nano Seal Technology provides the utmost bonding strength possible today. The tape adhesive is formed by blending
    various elastomeric polymers that contain self-priming properties. It generates the bonding strength by reacting and
    forming a bond at a molecular level. The tendency of polymers to virtually bond with almost all types of substrates
    makes it one of the most versatile and universal adhesive products.

    Surface Preparation:
    Surface must be clean and dry with no oil, grease or lose debris. Any existing salt or any contamination can be removed by pressure washing using fresh water. Any existing rust on metal surfaces must be cleaned using a wire brush and use ENERCON Antirust primer, Ener-Prime 100, before tape application. Ensure the surface to be dry of any moisture, dew, or frost before tape application.

    Application
    Measure the length of the area to seal and cut the tape length accordingly. It is suggested to cut tape into smaller pieces for ease in handling, however if there are two or more applicators working then use without cutting into smaller pieces. Remove release liner of the tape and press the tape onto the cleaned surface. 
    Use your hands with gloves or steel roller to apply pressure on top of tape. 
    Use roller or hand pressure to release any entrapped air. In case of overlaps, 50% of the tape width must be overlapped for horizontal joints and 7cm overlap for vertical joints. 
    Make sure the tape is applied on the exact surface, as tape cannot be peeled or removed, once applied. In the case of Fleece top tape, use EnerFlex SB100 or EnerFlex SF200 as UV resistant topcoat.

    EnerSeal Tape with Nano Seal Technology can be applied to a variety of surfaces and is suitable for 
    sealing metal overlaps, 
    side laps
    end laps
    terminations
    drain gutters
    skylights
    extrusions
    flashings
    concrete joints
    concrete cracks
    windows
    bitumen membrane overlaps
    TPO joints
    EPDM joints
    Dissimilar materials.


    Suggested alternatives: Compare
    [950] Apoc Incredible Heavy Duty Tape (50') Fleece 4inch
    Apoc Incredible Heavy Duty Tape (50') Fleece 4inch

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.