AWAZEL AWATEX RBE 3500 rubberized 200 L

1.Surface preparation:
 The surface must be clean and free of dirt, dust oil, grease. All the loosely adhering particles should be remove with suitable means. It is moisten the surface just before application but the surface should not be Water logged.

2. Application of product:
 Apply a prime coat by diluting AWATEX RBE 3500 with 50% clean water if the surface need. For metal surface use AWAZEL PRIMER D 41 as prime coat after dying of the primer coat, AWAZEL AWATEX RBE 3500 can be applied by trowel, brush, squeegee or roller. The first coat must be dried when the second coat should be applied at right angle to the first Coat should be uniform and even with no gaps.

AWAZEL AWATEX RBE 3500 is ideal to be used as damp proof elastomeric coating for all Concrete structures to withstand movements. Can be used as flexible waterproof coating for Floor and tiles, etc, also can be used as Protective elastomeric coating for woods and Metals against corrotive attackes

2-3m2 \liter\coat. The coverage may vary depending upon the porosity of the substrate. 
A dry film thickness of 500-600 microns can be obtained while applying at a rate one liter\sq. meter.