Supply and Apply (2) coats of Liquid applied Silicone waterproofing, UV-resistant

Roof Waterproofing / SAB® Mineral (Membrane) System:
1-One coat of bituminous primed surface.
2-One layer of APP Plain Membrane 4mm thick 180 g/m2.
3-One layer of APP Mineral Membrane 4mm thick 180 g/m2.

Roof Waterproofing / SAB® Mineral (Membrane) System:
1-One coat of bituminous primed surface.
2-One layer of APP Mineral Membrane 4mm thick 180 g/m2

Is an opaque aqueous white liquid, externally plasticized polyvinyl acetate emulsion of medium to high viscosity

Supply and apply the approved quality liquid waterproofing Cementitious system for all wet areas:-
1- Supply And Apply 2 coats of Cementitious Waterproofing.

SAB Coat HP Acrylic 213 is a high performance acrylic coating that is formulated to provide excellent corrosion resistance and chemical resistance. It is designed to be used in a variety of industrial applications, including marine, automotive, and aerospace. The coating is easy to apply and provides a durable, long-lasting finish.

Elastomeric Acrylic Waterproof & Protective Coating

concentrate and other support material.
1 Properly clean the work area from any impurities
2 Spray the side to be insulated with water, One of the characteristics of this material is that it requires a humid area to cause the required strong reaction.
3The first layer dedicated to closing the openings and areas connecting the concrete is implemented.
4 The crystal layer is placed against waterproof to coat all surfaces for waterproofing

is a state-of-the-art crystalline waterproofing admixture for concrete, available in powder form.

Is an emulsified bituminous coating modified with 10% rubberized polymer content

SAB® Liquid waterproofing system for wet area:
1- Liquid applied polyurethane waterproofing membrane - UV resistant (2) coat

Supply & Apply of the Liquid Silicone Waterproofing Coating per M²

1- Supply and Apply Substructure Protection Board 6 mm

1- Supply and apply one coat of cold Bituminous Primer
2- Supply and apply two layers of 4mm thick SBS Membrane

High Performance Rubberized Bitumen Emulsion Coating

1- Polyurethane foam spray 30-35mm
2- Acrylic top coat spray (LAITE GREEN)

per square meter
1mm-1.5mm Hand Applied, Rapid Curing Polyurea Waterproofing Membrane.

Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer

Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coat of cold Bituminous Primer
2 - Second coat of cold Bituminous Primer

is a one component, capillary crystalline, waterproof coating, which waterproofs concrete structures by forming insoluble crystals in concrete capillaries.

is an advanced waterproofing membrane designed to protect buildings from moisture infiltration. Its polymer-modified bitumen formulation offers exceptional flexibility and durability

is a comprehensive, high-performance, and cost-effective solution for preventing water damage in buildings. It is a versatile, flexible, and easy-to-install system that can be used in both new and existing construction. The system is designed to provide long-term protection against water damage and mold growth in the most demanding environments. It is a reliable and sustainable solution that can be used in residential, commercial, and industrial applications.

SAB® GP Adhesive 2170 is a two-component, low-odor, fast-curing adhesive that is designed to meet the most demanding requirements of the aerospace industry. It is formulated with a unique blend of high-quality raw materials to provide superior performance and reliability. SAB® GP Adhesive 2170 is easy to use and offers excellent bonding strength to a wide range of materials, including composites, metals, and plastics.

Two Component Polymer Modified Flexible Cementitious Waterproof Coating

ROOF WATERPROOFING / SAB® PRO 111 (MEMBRANE) SYSTEM:
1-Execute slope corners (skirting) 20cm*20cm along with the barbate.
2-Execute a Cavity 1.5*1.5 cm, along with the barbate over the skirting.
3-One coat of bituminous primed surface.
4-One layer of Membrane APP 4mm thick, 180 g/m2
5-Screed Concrete, 80mm Avg. 20/N - OPC 300 kg/m3
6-Execute slope corners 20cm*20cm along with the barbate.
7-Remove the ridges, then fill them with a sponge.
8-Supply and apply 1.5x1.5 cm mastic over the sponge.

Supply and apply the approved quality system for pile head treatment and insulation 500 mm DIAMETER:-
1- Repair surface with cementitious grout
2- Treatment by using (Fosroc) super cast DC and super cast EP10

Liquid Insulation System is a high-performance, easy to apply and can be applied to vertical and horizontal surfaces.

A service for smoothing concrete surfaces in factories and warehouses, used after "1-4" hours of pouring.

SAB® Substructure # Self Adhesive # Rubber Bitumen membrane # 1.5 mm is a versatile, self-adhesive membrane that is designed to provide a watertight seal for a wide range of applications. It is made from a high-quality rubber bitumen that is reinforced with a strong polyester fabric to provide added strength and durability. The membrane is easy to install and can be used for both new construction and retrofitting.

Supply and apply one layer of Protection Board 3.2mm thick.

1- Supply and apply one coat of cold Bituminous Primer
2- Supply and apply one layer of 4mm thick SBS Membrane

SAB® Tron Insulation System (SZHP) 155 Combo roof is a high performance, low-thermal conductivity roof system. It is designed to provide superior thermal insulation and energy efficiency. The system is designed to be used with a variety of roof types, including metal, tile, and sloped roofs. The SZHP 155 Combo roof is a cost-effective solution for residential and commercial buildings.

The SAB® Tron Insulation System 300 Combo System is a complete insulation system designed to provide superior thermal performance and energy efficiency. The system is comprised of a combination of SAB® 300 and SAB® 300 Plus insulation products, which are made from high-quality glass fiber. The system is designed to provide superior thermal performance and energy efficiency, and is suitable for use in a wide range of applications.

[330] SAB® Tron Insulation System, Combo Roof System
The RAK Green Building Regulation (Barjeel)
Supply and apply the approved quality waterproofing system for the roofs (Combo Roofing System).
1- Polyurethane foam, 60mm thick, and density of 40-45 kg/m³. ( UV 0.3 W/m²K ).
2- Acrylic - Liquid UV protection coat (600mic.Thick).
3- Geotextile /Separation Layer 100 g/m²
4- expansion separator material Fiberboard -at least 10 mm thick & no more than 16 square meters
5- Concrete screed (20N/M³ - 300 OPC, 80mm AVE. Thick.) without (Ice&Fibre)
6- Angle fillet (cement sand mortar ).
7- Remove the filler board/flexible sheet -stage (4).
8- Expansion joint filter (Backing rod and Pu sealant).
9- Acrylic Topcoat final

Imagine a world where you can enjoy the great outdoors without worrying about the elements. With SAB® Waterproofing system for Domes, you can create a safe and comfortable environment that shields you from the harsh weather. Our innovative system is designed to withstand the toughest conditions, so you can relax and enjoy the great outdoors without worrying about the elements. With SAB® Waterproofing system for Domes, you can create a safe and comfortable environment that shields you from the harsh weather.

The SAB®Tron Insulation System™ DCL Green Building Product is a revolutionary, high-performance insulation system that combines the latest advancements in thermal science with innovative design. It is the only insulation system that offers superior thermal performance, air quality, and structural integrity, all in a single, easy-to-install system.