is a single component liquid applied membrane, it cures by reaction with atmospheric moisture to form a tough
elastomeric waterproof membrane. is designed for use on horizontal and vertical surfaces.

Seal Thermal-Shield NT (Interior) is a high-performance, two-component, water-based sealant designed to provide long-lasting protection against road salt, water, and other environmental elements. It is formulated with advanced polymers to ensure superior durability and flexibility, making it an ideal choice for both residential and commercial applications.

Seal Thermal-Shield RF (Cool Roof) is a two-component, low-odor, elastomeric roof coating designed to provide superior protection against the elements. It is formulated with a blend of high-quality raw materials to provide long-lasting durability and performance. The product is easy to apply and can be applied over most existing roofs. It is also formulated to provide excellent resistance to UV rays and extreme weather conditions.

Seal Coatings Seal Thermal-Plast NT is a high-performance, cold-applied, rubber-based sealant designed to provide long-term protection against water, oil, and other environmental elements. It is a cost-effective alternative to traditional hot-applied sealants and is ideal for use on parking lots, driveways, and other areas where high-performance is required.

Seal Coatings Seal Thermal-Shield XT (Exterior) 20L is a high-performance, two-component, water-based, acrylic sealer. It is formulated to provide a long-lasting, low-maintenance finish on exterior concrete surfaces. The product is designed to provide a high level of protection against water, salt, and other environmental elements. It is also formulated to provide excellent resistance to UV rays and other weathering elements.

ELASTOFALT-ME is a liquid waterproofing membrane that is used to protect concrete and masonry structures from water damage. It is a single component, self-adhesive, liquid waterproofing membrane that is applied directly to the surface of concrete and masonry. It is a cost-effective and easy-to-use product that is designed to provide long-term protection against water damage.

Teflon tape is a type of tape that is made from a synthetic polymer called polytetrafluoroethylene (PTFE). It is a non-stick material that is commonly used in a variety of applications. Teflon tape is known for its high temperature resistance, chemical resistance, and electrical insulation properties. It is often used in applications where high levels of heat and chemical resistance are required.

BOPP Adhesive Tape is a strong, versatile, and reliable tape that is perfect for a variety of applications. It is made with a high-quality adhesive that provides excellent holding power, ensuring that your products stay securely attached. BOPP Adhesive Tape is also easy to use, as it can be applied quickly and easily to a wide range of surfaces.

.

TechnoBit, Lastick Damptect HDPE Self Adhesive Waterproofing Membrane is a self-adhesive waterproofing membrane made from HDPE. It is used to protect walls, roofs, and other surfaces from water damage. The membrane is easy to install and can be used for both residential and commercial applications. It is also UV resistant and can be used for outdoor projects.

Remmers Aqua ML 3in1 Multi-Purpose Varnish is a high quality, multi-purpose varnish that is suitable for a wide range of applications. It is a water-based varnish that is easy to apply and is suitable for use on interior and exterior wood, metal and masonry. It is also suitable for use on furniture, kitchen and bathroom cabinets, doors, windows and other surfaces. It is quick drying and is easy to apply.

Self-Adhesive Fiberglass Mesh Tape is a strong, durable tape that is ideal for a variety of applications. It is made from fiberglass mesh that is coated with a strong adhesive that allows it to stick to a variety of surfaces. The tape is easy to use and can be applied to a variety of surfaces, including metal, glass, and plastic. It is also resistant to high temperatures and is a great choice for applications that require a strong, long-lasting tape.

Remmers WP Sulfatex Rapid, Sulfatex Filler Fast 25kg is a fast-acting, high-performance filler for use in concrete and plaster. It is formulated with a high-quality, fast-reacting, high-sulfate content to provide a fast, reliable and economical solution for filling and leveling. It is ideal for use in residential and commercial applications, including foundations, footings, and slabs.

Remmers MB FL 2K 3in1 composite waterproofing system is a high-quality, multi-layered composite waterproofing system that is designed to provide long-term protection against water ingress. The system is made from a combination of high-quality, reinforced polymers and is designed to be easy to install. It is suitable for use in both residential and commercial applications, and is particularly popular in areas where high levels of water ingress are common.

.

Remmers Joint Tape VF120 is a high-quality joint tape that is used to seal joints between two surfaces. It is a self-adhesive tape that is easy to use and can be applied to a variety of materials. The tape is made from a strong, durable material that is resistant to UV rays, making it ideal for outdoor use. It is also waterproof and can be used in extreme temperatures.

Remmers Kiesol C [basic] is a high quality, easy to use, damp proof treatment. It is a ready to use, water based, acrylic based, water resistant, damp proofing treatment. It is a fast drying, non-shrink formulation, which is easy to apply. It is a versatile product that can be used on all types of timber, including hardwood, softwood, MDF, chipboard and plywood.

Remmers Clean FL 1Ltr is a powerful cleaner for all types of surfaces. It is a versatile cleaner that can be used to clean all types of surfaces, including walls, floors, and ceilings. It is a fast-acting cleaner that can be used to clean surfaces in no time. It is a highly effective cleaner that can be used to clean all types of surfaces. It is a highly effective cleaner that can be used to clean all types of surfaces.

Remmers WP DS Levell Waterproofing filler is a cementitious waterproofing product for use in the construction of vertical and horizontal walls and ceilings. It is formulated with a high quality cement and a special blend of fine aggregate and sand. The product is easy to apply and is suitable for use in all weather conditions.

Remmers MB 1K rapid Multi-functional Waterproofing is a product that is used to waterproof and protect surfaces.

Cork Sheets are a versatile and eco-friendly material that can be used for a variety of applications. Our 50x100cm Cork Sheets are made from 100% natural cork and are a sustainable alternative to synthetic materials. They are easy to work with, can be used for insulation, soundproofing, and even as a decorative element. With their unique texture and natural appearance, Cork Sheets can be used to create a warm and inviting atmosphere in any space.

Supply and apply one layer of Protection Board 4mm thick.

Polycarbonate sheets are a type of plastic that are used in a variety of applications due to their unique properties. They are lightweight, strong, and resistant to a wide range of chemicals. They are also easy to mold and can be used to create complex shapes. Polycarbonate sheets are commonly used in the manufacturing of electronics, automotive parts, and even in the construction of buildings. Their durability and versatility make them a popular choice for a variety of applications.

.

Fiberglass insulation is a type of insulation that is made from glass fibers that are melted and spun into a thin, continuous strand. It is a popular choice for its high level of insulation and its resistance to heat, moisture, and fire. Fiberglass insulation is used in a variety of applications, including residential and commercial buildings, as well as in applications such as marine and aerospace.

The Wagner PC 830 Plaster, Block Filler Sprayer Pump is a powerful and versatile tool designed to handle a variety of applications. It is ideal for plastering, block filling, and spraying various types of materials. With its high-pressure, low-flow design, the PC 830 ensures that you get the most precise and efficient results. It is also easy to use, featuring a simple trigger handle and a comfortable grip.

The GAMA G-250H is a hydraulic foam spray machine that is designed to apply a variety of foam materials to a variety of surfaces. It is capable of spraying a wide range of materials, including polyurethane, polyurea, and epoxy. The machine is equipped with a hydraulic power unit that allows it to generate high-pressure foam sprays. It is also equipped with a foam spray gun that can be used to apply the foam to a variety of surfaces.

PU Parquet 430 Adhesives,12kgThe PU Parquet 430 Adhesives,12kg is a high-quality adhesive that is designed to be used with parquet flooring. It is a strong adhesive that is able to withstand the weight of the flooring and the pressure of foot traffic. The adhesive is easy to apply and dries quickly, making it a great choice for those who want to complete their flooring project quickly and efficiently.

A Bitumen Filler Board is a board that is used to fill the gaps between the bitumen and the road surface. It is typically made from a combination of wood and asphalt. The wood is usually pressure treated to prevent rot and decay. The asphalt is used to provide a waterproof layer and to provide a smooth surface for the road. The board is typically made from a combination of wood and asphalt. The wood is usually pressure treated to prevent rot and decay.

Expanded Polystyrene Sheets, White, 25-30 kg/m³ are lightweight, rigid, and versatile sheets that are commonly used in the construction industry. They are made from expanded polystyrene, a material that is lightweight and easy to work with. The sheets are available in a range of sizes and thicknesses, and can be used for a variety of applications. They are commonly used in the construction of walls, roofs, and insulation.

Expanded Polystyrene Block, White is a lightweight, rigid, and versatile material. It is commonly used in the packaging, construction, and insulation industries. It is easy to mold and can be used to create custom shapes. It is also resistant to water, fire, and chemicals.