SAB® Substructure One Layer

One coat of cold Bituminous Primer
One layer 4mm thick SBS Membrane

Your Name *

Phone Number

Your Email *

Your Company

Your Question

Qty.

Submit

الشروط والأحكام
Prices excluding delivery costs

SAB® Service Foundation

The motive of the technique declaration for utility of waterproofing is to stop the water to percolate or penetrate into any underground concrete members. When the water penetrates into the sub-grade concrete-like basis such as mat foundation, footing, tie beam, etc. the metal reinforcement that embedded in the concrete would corrode due to a chemical response precipitated with the aid of water and the shape would in the end fail.

Application of waterproofing particularly for giant constructions would have to be strictly supervised via a excellent engineer in order to stop failure of software or nonconformity to the pleasant procedure.

In this technique announcement for utility of waterproofing membrane, we’ll be going to use the membrane kind waterproofing, this kind of waterproofing is beneficial for buildings like high-rise constructions which has a deeper basis the place water strain is extraordinarily high.

Install layer of 4mm thick SBS modified bituminous membrane bolstered with 180g/m2 non-woven polyester.
Unroll and role the membrane roll.
Roll out half of a roll length, heating the underside of the membrane with the fuel flame till the polyethylene movie and bitumen mass melts.
Unroll the membrane step by step and continuously.
A bead of liquid bitumen need to be seen on the underside of the roll.
The torch on membrane need to be firmly pressed onto the substrate in order to
avoid air entrapment the use of a curler or heavy brush.
Repeat this system with the 2nd 1/2 of the roll.
The membrane shall be torch utilized unfastened laid with 100mm broad overlaps.

"Tips to be followed after implementation."

Comply with warranty and maintenance conditions to maintain product quality and fully benefit from the warranty.
Avoid piercing the insulation layers and not placing any sharp objects on the insulation layer.
Handle insulation layers carefully and avoid any damage that may occur to them.
Do not delay in the subsequent insulation and maintenance work to maintain insulation quality and avoid damage that may occur to it in case of delay.
make sure not to use any chemicals that may affect the quality of the insulation.
Ensure the use of high-quality insulation materials that comply with approved industry standards.
Ensure proper installation of insulation according to the instructions on the package or approved technical specifications.
Consult specialists in this field regarding any problems or malfunctions that may occur with the insulation.
Be cautious when placing reinforcement steel to avoid piercing the insulation layers.
Do not leave the insulation exposed for a long period.
Contact us for any observations or concerns.

Start with the customer – find out what they want and give it to them.

SAB® Substructure One Layer

New Products

Share

Follow us