1. كافة المنتجات
  2. Pidilite Dr.Fixit 113 Fastflex kit 24kg
قائمة أسعار عامة

Pidilite Dr.Fixit 113 Fastflex kit 24kg

https://sab-gate.com/web/image/product.template/1263/image_1920?unique=76f0a9f

Pidilite Dr. Fixit 113 Fastflex Kit 24kg is a multipurpose cement that is used for fixing and repairing various types of masonry and concrete structures. It is a fast-setting cement that can be used for repairing cracks and holes in walls, columns, and other structures. It is also used for the construction of new structures and for the renovation of old ones.

173.25 AED 173.25 AED 173.25 AED

165.00 AED

    هذه التركيبة غير موجودة.

      الشروط والأحكام
    الاسعار لا تشمل النقل
            

    Delivery with in 2 days
    Cementitious Wet Area Pidilite

    المدونات ذات الصلة

    Pidilite MEA Chemicals

    manufacture of high performance construction chemicals

    is a high elastic, waterproofing cement based material. With special waterproofing properties, easy to use by plastering, applying by using a brush and roller or trowel. Can be painted or overlaid. Use with waterproofing for non-toxic water tanks, can be used with drinking water. 
    (Passed the water quality test on toxic substances (heavy metals) of the Water Quality Control Department) Provincial Waterworks Authority. 
    After mixing the two parts together, the liquid material can be applied on the desired surface. 
    After drying, it looks like a rubber sheet. It has the property to prevent water seeping through, seamless and flexible, not cracking. Japanese standard

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    Surface Preparation 

    • Allow new concrete and masonry substrate to fully cure prior application. 
    • All surfaces must be free from oil, grease, wax, dirt or any other form of foreign matter which might effect adhesion. 
    • Spalled Concrete must be sound before applied. 
    • Substrate should be reach a "Saturated Surface Dry" (SSD) condition (damp, without standing water)

    Mixing

    • Use Portland cement mechanical mixer at slow speed; add product powder part to liquid part in a clean container until a smooth and homogenous slurry mixture is achieved. 
    • Allow the mixed slurry to stand for 5-10 minutes for releasing air-trapped during the mixing prior to application.
    • Mixing material must be use within recommend pot life. 

    Applications

    • Dr. Fixit Fastflex slurry can be applied by brush or roller. DO NOT dilute with water. 
    • Recommend Coverage rate is approximately 1.1 kg./m2/coat for 1 mm. (Minimum 2 coat.). 
    • Allow the slurry to cure for at least 15-30 min. before applying second coat. Do not leave the first coat to dry longer than 8 hours. 
    • For tile adhesive application on surface allow surface to cure for 3 days prior. 
    • If first coat was cure over 8 hours, fix surface by applying 2 to 3 coats of Dr.Fixit Pidifin 2K for desire waterproof surface thickness or fix by applying Dr.Fixit Fevimate XL tile adhesive to act as top coat protection for Dr.Fixit Fastflex.

     Curing

    • For maximum protection, allow 12 to 24 hours curing time after second coat. 
    • Leave Dr. Fixit Fastflex at least 7 days to cure before filling or sealing water to test leaks.
    • Non Flammable. 
    • Avoid contact with skin and eyes. Any splashes to the skin or eyes should be washed off with clean water.
    • Wear mask when mixing. 
    • Wear protective gloves and eye protection when applied.

    منتجات جديدة

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.