1. كافة المنتجات
  2. Webertherm Glue
قائمة أسعار عامة

Webertherm Glue

https://sab-gate.com/web/image/product.template/1570/image_1920?unique=e785cf4

Webertherm Glue is a high-performance adhesive that is designed to provide a strong, long-lasting bond between a variety of materials. It is a two-component system that consists of a liquid adhesive and a solid activator. When the two components are mixed together, they react to form a chemical bond that creates a strong, durable bond between the two surfaces.

31.50 AED 31.5 AED 31.50 AED

30.00 AED

    هذه التركيبة غير موجودة.

      الشروط والأحكام
    الاسعار لا تشمل النقل
            

    Delivery with in 2 days
    Weber Glue

    webertherm glue is a pre-mixed dry blend of cement, fillers, polymer, and additives. 
    It is mainly used as adhesive to fix rigid insulation to a variety of surfaces: masonry, brick, concrete , gypsum and cement board. 
    It is resistant to mechanical stress and has an outstanding bonding effect and is water resistant.

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    Apply the Webertherm Glue mixture on the back side of the insulation board (Mineral wool such as webertherm SW or EPS). 
    Apply the adhesive on the inside of the board using the “strip-point” method. 
    It consists of preparation of continuous circumferential block (at least 3 cm wide) at the edge of the board and even distribution of 6 to 8 patches of 8 to 12 cm in diameter on the whole surface. 
    Immediately after application of the mortar on the board, fix the board to the substrate by firm pressing and level it. 
    In case of even and smooth substrates, the mortar can be evenly distributed using a notched float on the whole board surface to ensure 2 to 5 mm layer thickness. 

    CAUTION: Immediately place the insulation board on the substrate, ensuring that no Webertherm glue mixture gets into board joints. 
    Do not allow the Webertherm glue mixture to form a skin before positioning the insulation board on the substrate as it will affect the bond strength. 
    Joints between adjacent insulation boards should be reduced to the minimum

    Start with the customer – find out what they want and give it to them.

    منتجات جديدة

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.