DUSEAL AG has excellent water vapor barrier properties.
It is aluminum faced, which prevents solar heat gain, reduces heat aging, and extends the life of the membrane.
It provides indirect savings on energy.
It has excellent bonding strength.
It has superior dimensional stability.
It has excellent flexibility at low temperatures.
It has high tensile and tear strength.
It has excellent durability.
It is easy to apply.
DUSEAL AG membranes are tested to ASTM, UEAtc, and all other relevant international standards.
It is suitable for water vapor barrier applications.
It is ideal for waterproofing and light and heat reflective exposed applications.
It can be applied in ducts, tunnels, and vertical structures.
It can be applied directly on thermal insulation boards (Expanded Polystyrene, Extruded Polystyrene, Polyurethane, Glass and Rock wool) to form a waterproofing, vapor barrier, and thermal insulation combined system.
DUSEAL AG membranes carry a material warranty against any manufacturing defects.
The surface to be waterproofed should be dry, smooth, and free from dust, dirt, protrusions, and cavities.
The surface should be primed thoroughly with Duproof Primer and allowed to dry.
DUSEAL AG can be adhered to various types of substrates (concrete, concrete blocks, bricks, foam concrete, fiber cement board, wood boards, and metal substrates) by removing the siliconized foil/paper from the bottom side.
DUSEAL AG membranes are supplied in rolls of 1m x 15m and are shrink-wrapped on pallets.
The rolls should be kept upright on pallets under shade and should not be stacked one over the other.
There are no direct health hazards associated with DUSEAL membranes, but normal precautions for hot and volatile substances should be observed during application.
DUSEAL AG has a thickness of 1.5mm, 1.8mm, or 2.0mm.
The nominal weight of DUSEAL AG is 1.7kg/m2, 2.0kg/m2, or 2.2kg/m2.
The dimensions of DUSEAL AG are 15m x 1m.
The top surface of DUSEAL AG is covered with alkali-proof aluminum foil.
The reinforcement of DUSEAL AG is 50-60g/m2 of Glass Fiber.
The bottom surface of DUSEAL AG is covered with siliconized removable paper/foil.
DUSEAL AG has a softening point of 110°C according to ASTM D 36.
It has flexibility at low temperatures of ≥ -20°C according to DIN 52123.
It has heat resistance at 90°C for 2 hours with no flow according to UEAtc.
It has water absorption after 24 hours of less than 0.15% according to ASTM D 570.
The carrier of DUSEAL AG is Glass Fiber.
It has an elongation (L/T) compound of >1000% according to ASTM D 412.
The tensile strength (L/T) of the film is 35/32 N/mm according to ASTM D 638.
