1. كافة المنتجات
  2. Remmers, MB 1K rapid Multi-functional Waterproofing
قائمة أسعار عامة

Remmers, MB 1K rapid Multi-functional Waterproofing

https://sab-gate.com/web/image/product.template/1594/image_1920?unique=f684070

Remmers MB 1K rapid Multi-functional Waterproofing is a product that is used to waterproof and protect surfaces.

892.50 AED 892.5 AED 892.50 AED

850.00 AED

    هذه التركيبة غير موجودة.

      الشروط والأحكام
    - Prices excluding delivery costs.
    - The above price may vary depending on the availability of raw material price, delivery and minimum order quantity.

            

    Delivery with in 3 days
    Remmers

    المدونات ذات الصلة

    Remmers

    TDS Protective & Restoration Paints & Coatings

    Usage
    Min. 1.3 kg/m²/mm dry layer thickness
    Layer thickness and application rate when using as crack-bridging MWS for interiors and exteriors: see application rate table under Application Examples
    Apply to a large enough trial area to determine the precise amount required.

    Field of application

    • Waterproofing in new buildings
    • Can be applied > 3 m in the ground
    • Connection to water-impermeable concrete structures
    • Cross-sectional waterproofing in and under walls
    • Wall base and render waterproofing
    • Subsequent exterior waterproofing in existing buildings
    • Bonding layer on old bitumen coatings

    Properties

    • Can be applied directly from the container without mixing
    • Fast, crosslinker-assisted complete drying
    • Can be activated extremely quickly if required for a rainproof surface in seconds
    • Rapid bond adhesion, even on non-mineral substrates
    • Very low emissions (GEV-EMICODE EC 1Plus)
    • Radon-tight (verified through testing)
    • Highly flexible, elastic and crack-bridging
    • Water pressure tight
    • Can be plastered and painted over
    • Can be applied as a slurry, with a brush or trowel, or by spraying
    • Freeze/thaw-resistant

    Substrate requirements

    • The substrate must be clean, dry, flat and capable of bearing a load, and free of dust, oil, grease and release agents.
    • Roughen non-mineral substrates.

      Preparations
    • Remove projecting seams and mortar remains.
    • Break off or chamfer corners and edges.
    • Produce the sealing cove with a suitable mortar.
    • Seal off indentations > 5 mm using a suitable filling knife.
    • Roughen the surface of plastic pipes with sandpaper; clean and, if necessary, sand metal pipes.
    • If necessary, provide damp proofing.
    • Prime absorbent mineral substrates with Kiesol MB.
    • Create a scratch coat using the product as a contact layer and in order to prevent blisters.

    Technical Data Sheet

    Safety Data Sheet

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    منتجات جديدة

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.