AWAZEL Awatex RBE Bituminous Emulsion 6510

Vapor permeable, allowing the substrate to breathe.
Reduced chloride penetration due to hard, impermeable surfaces.
Simple and easy to use, requiring no skilled labor.
Single component, ready to use as supplied.
Solvent-free formulation.
Cold applied, with no heating required.
Non-slumping for ease of application.
Easy to apply due to its paintable consistency, suitable for both new and old concrete.
Versatile with many areas of use.

1. Surface Preparation: The surface to which AWAZEL AWATEX RBE 6510 will be applied must be clean and free of dirt, dust, rust, or any other materials that may impair adhesion. 
   If moss or lichen is present, remove it completely. 
   Cut and reseal any blisters in asphalt or roofing. 
   Remove any chippings that do not form part of the surface of mineralized felt. 
   Old concrete and steel must be structurally sound prior to application.
2. Application: Apply using a brush or roller. 
   Two or more coats must be applied to ensure a durable finish. 
   The second and subsequent coats should be applied at right angles to each other, once the previous coats have fully dried.

A coverage rate of 3-5 m² per liter can be expected, with a minimum recommended coverage of 5 m² per liter. Two coats are required for optimal results. Coverage rates may vary depending on the density, porosity, and texture of the concrete being treated.