1. كافة المنتجات
  2. Asmaco ASMACOAT WP 900 Liquid Applied Polyurethane Waterproong Membrane
قائمة أسعار عامة

Asmaco ASMACOAT WP 900 Liquid Applied Polyurethane Waterproong Membrane

https://sab-gate.com/web/image/product.template/1502/image_1920?unique=521d9d6

Asmaco ASMACOAT WP 900 is a water-based, two-component, polyurethane-based, liquid applied membrane. It is a single-coat system that is applied to the substrate and cured to form a continuous, seamless membrane. The membrane is a low-permeability, high-barrier, water-resistant, and air-permeable membrane. It is used in a variety of applications, including water treatment, wastewater treatment, and swimming pools.

322.35 AED 322.35 AED 322.35 AED

307.00 AED

    هذه التركيبة غير موجودة.

      الشروط والأحكام
    الاسعار لا تشمل النقل
            

    Delivery with in 2 days
    Liquid Polyurethane Asmaco

    المدونات ذات الصلة

    Asmaco

    Silicone Sealants, Spray Paints, Adhesives, Tapes


    is a liquid applied, single-component moisture-curing polyurethane coating. 
    It is designed to form a seamless, elastomeric waterproong membrane. 
    When fully cured ASMACOAT WP900 forms a permanently exible waterproof lining to most building surfaces including reinforced concrete, block works, brick works, cement render, plaster board and bre-reinforced cement. 
    e properties like high elasticity, very good crack bridging and impermeability to water vapour make it capable of eectively waterproong even in most demanding conditions. 
    It is and advanced state of water proong system and oers tangible, coast saving benets over conventional sheet and bitumen based systems.

    • Single component ready for use. 
    • Does not create mess and objectionable odor like bitumen based materials. 
    • Excellent elasticity, allows expansion and contraction with the substrate, without brittle 
    • Excellent chemical resistance. 
    • High thermal stability which eliminates melting and owing at high temperature. 
    • Excellent workability. 
    • Excellent adhesion to wide range of construction materials. 
    • Provides a continuous, seamless waterproong membrane. 
    • Easy to repair.

    can be used for a wide range of waterproong applications viz. Roofs, Basements and Foundations, Tunnels and bridges, Terraces and Balconies, Car Decks, Plaza Decks, Planter Boxes, Swimming pools, water storage tanks, pier, Retaining Walls, Internal Wet Areas (kitchens, bathrooms) etc. 
    ASMACOAT WP 900 can also be used in sewages works and tanking applications in areas where aggressive ground water conditions prevail.

    ASMACOAT WP 900 should be applied by brush, roller, trowel or airless spray in two coats to achieve a minimum dry lm thickness of 1.0 mm. 
    e second coat should be applied at right angle to the rst one once the rst coat is completely dry (but before 48 hours). 
    ASMACOAT WP 900 membrane must be cured for a minimum of 24 hours at 25 °C before placing protection. 
    Extended periods of exposure will require the provision of membrane to eliminate possible surface damage or to avoid contamination it is recommended to apply screed mortar bedding or protection boards. 
    Tiling or nished ooring installations should be carried out as soon as possible aer full cure of membrane is established. If protection board is used, a dust coat of cement should be used to prevent adhesion of the membrane to the boards. 
    Where a bond with the topping is not required, a separator sheet should be used. 
    Do not apply tile adhesives to ASMACOAT WP 900 membrane whilst the membrane is still uncured. 
    To provide a good key with the membrane, spread the nal wet coat of ASMACOAT WP 900 with sucient clean silica sand. Standard Compliance: ASMACOAT WP900 conrms to: • ASTM C836

    منتجات جديدة

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.