1. كافة المنتجات
  2. Fosroc Renderoc TG 25kg
قائمة أسعار عامة

Fosroc Renderoc TG 25kg

https://sab-gate.com/web/image/product.template/1482/image_1920?unique=031ad04

Fosroc Renderoc TG 25kg Bag is a cementitious render that is used to create a smooth, hard and durable finish on masonry and concrete. It is formulated with a blend of high quality cement and fine aggregate to provide a high level of workability and a fast application rate. The product is easy to apply and can be used on both vertical and horizontal surfaces. It is ideal for use on new builds, renovations and repairs.

40.95 AED 40.95 AED 40.95 AED

39.00 AED

    هذه التركيبة غير موجودة.

      الشروط والأحكام
    الاسعار لا تشمل النقل
            

    Delivery with in 3 days
    Fosroc Repair Mortar

    المدونات ذات الصلة

    Fosroc, Constructive Solutions

    TDS

    is supplied as a ready to use blend of dry powders, which requires only the addition of clean water to produce a highly consistent, lightweight repair mortar suitable for general purpose concrete and masonry repairs.

    Uses Renderoc TG is suitable for hand application to repairs where light to medium load bearing is required. 
    Typical applications would include, but not be limited to, the following: 

    • Vertical and overhead repairs to restore ‘covercrete’ 
    • General concrete and masonry repairs 
    • Voids greater than 10 mm deep 
    • Repairs to honeycombing 
    • Larger scale repairs where formwork cannot be erected
    • High build achievable without formwork - saving time and expense of multiple applications
    • Formulated for use in hot climates
    • Can be applied by the wet or dry spray process for fast exceptionlly high build repairs with enchanced characteristics
    • Lowpermeability provides good protection against carbon dioxide and chlorides
    • Excellent bond to concrete substrate
    • Shrinkage compensated
    • Contains no chloride admixtures

    Renderoc TG should be mixed and applied in strict accordance with the Product Method Statement, a copy of which may be otained from your nearest Fosroc office.

    Estimating

    Supply
    		Yield
    Renderoc TG : 25kg bags
    Nitobond AR*† : 1 and 5 litres    		Renderoc TG : 15.8 ltrs per 25kg bag
    Nitobond AR*† : 6-8m²/litre 

    Limitations

    • Renderoc TG should not be used when the ambient temperature is below 50C and falling.
    • Renderoc TG should not be part mixed.
    • Renderoc TG should not be exposed to running water either during application or prior to final set.
    • Water ponding is not recommended for curing.

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.