Pidilite Uniproof 5000 25kg

1 SURFACE PREPARATION

• Ensure the roof to be treated has a minimum of 1:100 drainage fall to a suitably sized outlet. 
• All substrates must be sound, stable and free of dust, dirt, oil and any other contaminants which may impair adhesion. 
• Mineral substrates must exhibit a smooth absorbant surface profile, any spalled or damaged surfaces must be repaired using a suitable Dr. Fixit Repair material. 
• Metal roofs must be free of rust and all fixings must be securely tightened. All gaps between overlapping metal panels must be sealed using a suitable Dr. Fixit approved acrylic sealant. 
• All penetrations through the roof such as pipework or ducting must be sealed using a suitable Dr. Fixit approved sealant or expanding foam filler. 

2 PRIMING 

• All substrates should be primed using one coat of Dr. Fixit Uniproof 5000 mixed with water a ratio of 4:1. 
  The primer should be allowed to dry for a minimum of 3 hours before overcoating. 

3 APPLICATION 

• All cracks and movement joints in mineral substrates, joints in roof panels, penetrations and abutments with upstands must be reinforced using a suitable reinforcing fabric set into a coat of Dr. Fixit Uniproof 5000. 
• Two further coats of Uniproof 5000 should be applied at a minimum coverage of 1 kg/sq.mt using brush, roller or spray. 
  Allow a minimum of 8 hours drying time between coats. 
• Larger roofs in excess of 200 sq.mt should incorporate a suitable reinforcing fabric in the first coat. Fabric joints should overlap by at least 75 mm.
  

Can the Pidilite Uniproof 5000 be used on all types of roofs, including concrete, metal, and asbestos?
It is best to consult the manufacturer or a professional in the field to determine if it is suitable for use on all types of roofs

Is the Pidilite Uniproof 5000 suitable for use as an anticarbonation coating for car park decks?

Can the Pidilite Uniproof 5000 be used as a protective coating over foam insulations?

Is the Pidilite Uniproof 5000 a suitable waterproofing coating for combo roof systems?

Can the Pidilite Uniproof 5000 be used as a protective coating on concrete bridge decks and underpasses?

What application methods are recommended for the Pidilite Uniproof 5000? Can it be applied by brush, roller, and spray?

Does the Pidilite Uniproof 5000 have the ability to withstand substrate movement?

Is the Pidilite Uniproof 5000 UV resistant?
is UV resistant for up to 100 hours, as per ASTM G 154.

Does the Pidilite Uniproof 5000 provide a seamless, high-quality waterproofing performance?

Can the Pidilite Uniproof 5000 withstand occasional foot traffic?