Used as waterproofing and protective coating for the following structures:
- Sloped concrete roofs, metal profile roofs & asbestos roofs
- Anti-carbonation coating in car park decks
- Protective coating on underpasses & concrete bridge decks
- Protective coating on polyurethane foam insulation
PRIMING
BAUCOAT WP PLUS shall be diluted with 20% water and applied as primer coat on the concrete surface to seal the pores and stabilize the surface.
The primer also functions as an adhesion promoter for the top coats. This primer coat can be applied by a brush, roller or airless spray and allowed to dry completely before the application of acrylic coating.
MIXING & APPLICATION
Mix the contents of the drum prior to the application to remove any sediment. BAUCOAT WP PLUS can be applied by soft bristled brush, roller or an airless spray.
When applying by airless spray then dilute the coating with approximately 5% water to reduce the viscosity of the coating.
Apply the first coat of undiluted material at a coverage rate of 1 kg/m²/coat to get a Dry Film thickness of 0.5 mm.
