1. كافة المنتجات
  2. Acrylic Waterproofing
  3. Terraco Flexicoat Acrylic Waterproof Coating
قائمة أسعار عامة

Terraco Flexicoat Acrylic Waterproof Coating

https://sab-gate.com/web/image/product.template/1640/image_1920?unique=1fdf0ca

Terraco Flexicoat Acrylic Waterproof Coating is a two-component, self-crosslinking, acrylic polymer emulsion. It is designed to provide a flexible, water-based, acrylic coating for a variety of applications. The product is formulated to provide excellent water resistance, flexibility, and durability. It is designed to be used as a topcoat over other paints and coatings.

    هذه التركيبة غير موجودة.

    Submit

      الشروط والأحكام
    الاسعار لا تشمل النقل
            

    Acrylic Coating Terraco


    A one-pack, positive pressure, roof coating which provides a highly flexible waterproof coating with excellent weather resistance and long life flexibility. Ideally suited for use in areas with extreme climatic conditions. It is applied by brush or spray and after drying can be walked upon uncovered.

    Flexicoat is a blend of weather resistant pigments, fillers and acrylic resins with the following properties:

    • Waterproof and weatherproof coating.
    • Allows surface to breath while remaining strongly anchored to the substrate.
    • Provides a seamless coating.
    • High flexibility.
    • Fast drying.
    • Reflects Ultra-Violet (light) rays.

    Flexicoat is designed for application on roofs constructed from a wide variety of materials, i.e. concrete, light weight concrete, roof tiles, wood, galvanised steel, asphalt and asbestos cement. Ensure a slope of 1:75 is maintained to avoid ponding.

    Preparation
    Ensure dust, dirt and foreign matter are removed from roof surfaces. All cracks should be made good with TERRACO Acrylic Filler. Before overcoating old substrates in humid tropical areas surfaces should first be washed down with a solution of household bleach 12 hours before re- coating to prevent the re-growth of fungi and algae.

    Priming
    If substrate is porous, it is best to use TERRACO Penetrating Primer prior to Flexicoat application.

    Application
    Flexicoat can be applied by spray or brush, embedding glass fibre scrim in areas which require reinforcement. Allow to dry and apply another coat to give an overall consumption of approximately 1-1.5kg/m2. Do not apply if rain is threatening, as Flexicoat is not resistant to rain until fully dry.

    Clean tools and equipment with water after use

    منتجات جديدة

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.