Foam concrete is a lightweight concrete made by mixing cement
The implementation of foam concrete requires the main contractor to provide water, cement, and electricity. The consumption of foam concrete is one bag of cement per square meter with a density of 750 kg/m³.

Supply & Apply Coating of Containment Areas and Tanks

Supply & apply Protection Screed 50mm Thick - 250 OPC - per M²

Supply and apply the approved quality liquid waterproofing Cementitious system for all wet areas:-
1- Supply And Apply 2 coats of Cementitious Waterproofing.

SAB® Crystal 410 concentrate and one more other supporting material.
• As preparation:
• Cleaning scope of work area properly.
• Spraying the outer side with water, the Property of this material it needs wet area to make the required strong interaction.
• Puncture the surface by making tiny holes, this will ensure perfect absorption.
• Cleaning these small holes and insures it dry; taking into consideration the whole area is still wet.

SAB® Liquid waterproofing system for wet area:
1- Liquid applied polyurethane waterproofing membrane - UV resistant (2) coat

Supply & Apply of the Liquid Silicone Waterproofing Coating per M²

1- Supply and Apply Substructure Protection Board 6 mm

Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer
2 - Supply and apply two layers of waterproofing membrane SBS 4mm thick.

1- Polyurethane foam spray 30-35mm
2- Acrylic top coat spray (LAITE GREEN)

per square meter
1mm-1.5mm Hand Applied, Rapid Curing Polyurea Waterproofing Membrane.

Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer