1. All Products
  2. NEOSEAL FLEX 550 Acrylic Cementitious Waterproofing Coating
Public Pricelist

NEOSEAL FLEX 550 Acrylic Cementitious Waterproofing Coating

https://sab-gate.com/web/image/product.template/1456/image_1920?unique=5630319

is a two component acrylic modified cementitious coating with excellent flexibility for use on masonry and concrete substrates.

57.75 AED 57.75 AED 57.75 AED

55.00 AED

    This combination does not exist.

      Terms and Conditions
    - Prices excluding delivery costs.
    - The above price may vary depending on the availability of raw material price, delivery and minimum order quantity.

            

    Delivery with in 2 days
    Cementitious

    Two Component Flexible reinforced Acrylic Cementitious Waterproofing Coating

    NEOSEAL FLEX 550 is a two component acrylic modified cementitious coating with excellent flexibility for use on masonry and concrete substrates which cures to form a tough flexible coating with high waterproofing properties.

    Technical Data Sheet

    NEOSEAL FLEX 550 acrylic cementitious coating shall be applied as per the following general method of application:
    A. Substrate preparation:
    The performance and ultimately the durability of the coating largely depends on the condition of the substrate. 
    Therefore, conditioning and preparation of the substrate is of utmost importance.
    Concrete surface:
    The surfaces shall be thoroughly cleaned to remove all dust particles and laitance. 
    Surface defects like cracks, holes or voids in the concrete needs to be repaired using an appropriate polymer modified mortar (PMM) within the correct ratio of (1:5:15). 
    After the surface needs to be in SSD condition not with standing water.

    B. Mixing
    The material is supplied in two parts and pre measured. Take the liquid in a container and slowly add the powder to the liquid and mix using a slow speed drill fitted with a suitable paddle mixer until a lump free consistency is obtained. 
    Do not mix more material than that can be used within 50-60 minutes. Mix thoroughly and keep mixing the material during application. Do not add water at any stage.

    C. Application
    Apply with a short stiff bristle brush or roller once the 1st coat is applied to achieve the desired thickness. Apply the 2nd coat after the 1st coat is completely dried to achieve a minimum thickness of 1.8 – 2 mm.

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
    • Easy to mix and apply.
    • Application by brush, roller or spray.
    • Suitable for light pedestrian traffic.
    • Non Toxic, suitable for use in potable water applications.
    • Excellent waterproofing properties and flexible in nature.
    • Excellent adhesion to both porous and non porous substrates.
    • Resistant to carbon dioxide and chloride ion diffusion.
    • Anti-carbonation coating
    • Breathable coating.

    NEOSEAL FLEX 550 is easy to apply, suitable for waterproofing concrete and masonry substrates in the following areas:

    • Foundations
    • Terraces, balconies and roofs.
    • Waterproofing of gardens, swimming pools, basement, and sandwich application.
    • Concrete gutters
    • Under tile waterproofing
    • Protect the concrete surfaces from carbonation and chloride attack
    • Wet areas, like bathrooms, kitchens, etc.
    • Protective coating on polyurethane foam insulation.
    • Waterproofing and protection against brackish water.
    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.