1. All Products
  2. DOW Voracor Polyurethane Rigid Foam Greenbuilding
Public Pricelist

DOW Voracor Polyurethane Rigid Foam Greenbuilding

https://sab-gate.com/web/image/product.template/1156/image_1920?unique=b118eff

Voracor CS 1089 Polyol & CD 526 Isocyanate 210/250 kg set
Rigid foam with closed cells for thermal insulation and waterproofing with an applied density of 42~45kg/m3

5,796.00 AED 5796.0 AED 5,796.00 AED

5,520.00 AED

    This combination does not exist.

      Terms and Conditions
    - Prices excluding delivery costs.
    - The above price may vary depending on the availability of raw material price, delivery and minimum order quantity.

            

    Delivery with in 5 days

    Voracor CS 1089 System is a polyurethane foam system used to produce rigid foam with closed cells for thermal insulation with an applied density of 40 kg/m3. 
    The reaction of Voracor CS 1089 Polyol and VORACOR® CD 526 Isocyanate gives foams with good mechanical properties, dimensional stability and good adhesion to usual substrates. 
    Both high and low-pressure machine can be used during the processing. 
    It is recommended a substrates temperature not lower than 25 C.

    Polyurethane components are moisture sensitive. Therefore they must be stored at all times in sealed, closed containers. 
    The substrate shall be free of oil, grease, etc. 
    It shall be cleaned and the substrate should be rough to get good bonding with P.U. chemical. 
    The reaction of P.U. chemical depends on the temperature of the chemical and atmosphere temperature. 
    Higher the temperature, faster the reaction and vice versa. 
    In winter, if the ambient temperature very low, then the heater provided in the machine to be used, to bring the chemical temperature to the required level. 
    The substrate shall be free of oil, grease, etc. 
    It shall be cleaned and the substrate should be roughen to get good bonding result.

    Properties
    Both high and low pressure machines can be used. Insulation application can be applied on substrate like metal, plywood and concrete Etc. for Thermal resistance and Waterproofing

    Spray Application
    The thickness of spray is dependent on the R-value required and the thickness shall be between 30 mm to 150 mm depends on the application.The spray foam consists of several layers. In general one layer will have the thickness of 10 mm.

    Slab Preparation
    The substrate shall be free of oil, grease, etc. It shall be cleaned and the substrate should be rough to get good bonding with P.U. chemical.

    PU spray foam system for the production of spray foam for insulation application. The system can be applied on substrate like metal, plywood and concrete as a Thermal Insulation and Waterproofing System. The thickness of spray is dependent on the R-value required and the thickness shall be between 30 mm to 150 mm depends on the application.The spray foam consists of several layers. In general one layer will have the thickness of 10 mm and This is dependent on the skill of the applicator. 

    Properties


    Suggested alternatives: Compare
    BCI Polyurethane Polyrex Rigid Spray Foam Set for Greenbuilding
    BCI Polyurethane Polyrex Rigid Spray Foam Set for Greenbuilding
    [4465] Harwal Rigid Polyurethane Spray Foam Insulation
    Harwal Rigid Polyurethane Spray Foam Insulation
    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    New Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.