ANQA-ROOF HD Elastomeric Roof Waterproof Coat

• Waterproof coating.
• Allows surface to breath while remaining strongly adhered to the substrate.
• Good solar reflectivity
• Economical
• Reflect UV rays.
  

• Waterproof and protective coat over sprayed PU foam.
• Waterproof coating for sloped and horizontal concrete and light weight concrete roofs.
• Waterproof coating over existing terrazzo tiles.
• Waterproof coating over corrugated iron sheets.

Application Method:

• Surface Preparation: Ensure that surfaces are solid and free from any loose particles, grease, and oil.
• Priming: Apply a primer over porous and concrete surfaces. Dilute ANQA-ROOF HD with an appropriate amount of water as needed (approximately 3 to 4 kg of water per 20 kg pail).
• Coating: Apply the required coats once the primer is nearly dry. Multiple coats should be applied perpendicularly to each other.
• Joint and Crack Treatment: All joints and cracks must be treated and reinforced using fiberglass mesh and suitable filling materials.Drying Time: Allow at least 24 hours for a coat to dry before applying an additional coat.
  
  Weather Considerations: It is not recommended to apply the coating after direct rain. Wait for 48 hours or ensure that the surface is completely dry before application.
  

 COVERAGE:
Apply ANQA-ROOF HD using a spray, brush, or rubber squeegee in at least two coats, with each coat approximately 200 microns thick. This results in an estimated consumption of 1.5 – 1.8 m²/kg per coat.